[jhb_airlines] Re: ATOC/FPI problem

  • From: Mike Lucas <mhlucas@xxxxxxxxxxxx>
  • To: jhb_airlines@xxxxxxxxxxxxx, Tom Isaac <tgi-alarms@xxxxxxxxxxxx>
  • Date: Wed, 28 Dec 2005 11:39:47 +0000

Kev

That looks like a pretty comprehensive solution. I'll pass it on to Tom Isaac - let's hope that it works for him too.

Thanks

Mike L

Kev Townsend wrote:
People may remember that I suffered exactly this problem when starting on FPI.

I have Zone Alarm Pro and refer my current (working) settings below:

1 Go To the "Firewall" Tab.
2 With "Internet Security" slider set to Medium, hit the "Custom" button.
3 On the "Internet Zone" Tab, "High Security Settings" - ensure "Allow broadcast/multicast" is ticked.
4 Farther down (bottom 4 options before "Medium Security Settings") Allow In/out UDP and TCP Ports -
I have - 80, 1035-1500, 15000, 15201, 15400, 15810, 15850, 16850 in all 4 registers (Cut this and Paste)


This will allow all FPI info In and Out!, obviously Port 80 is for other things (ftp upload etc)

I have also taken the precaution of blocking ports 1-79, 81-499, 501-1035, 1501-1700, 2000-9999, 20000-65000 in both UDP and TCP in the Medium Risk section.

I hope this hlps

Regards for the New Year to all.

Kev T








At 16:53 12/27/2005, you wrote:




Other related posts: