It started with 7 and here are the instructions. In JAWS 7, there are new scripts in both the Outlook and Outlook Express script files that, when enabled, allow you to reply directly to the individual who sent a message to a list without replying to the whole list. The scripts are named ReplyDirectlyToSender and here's how to enable them: 1. Open your e-mail program, Outlook or Outlook Express. This function is not available to Eudora users. 2. Press INSERT+8 to open the Keyboard Manager. 3. If necessary, press TAB once to move focus into the list if individual scripts within the script source file. 4. In the list of scripts, locate the ReplyDirectlyToSender script. 5. Press CTRL+A to assign a keystroke to this script. I used CTRL+SHIFT+A since it wasn't assigned to anything else, but you can use any other unassigned keystroke. 6. Press TAB once and uncheck the check box that asks if you want to assign the keystroke only to whatever keyboard configuration (desktop or laptop) you're using. 7. TAB to the OK button and press ENTER. 8. Press ENTER again to save and exit. ----- Original Message ----- From: Richard Sherman To: jfw@xxxxxxxxxxxxx Sent: Monday, December 11, 2006 5:49 PM Subject: Re: replying privately to a list message with Jaws 8 Hi, I am just curious on something here. I am using version 7.1.0500 on an XP home system and this command works just fine. Does anyone know how far back in versions this will work? Thanks for all the help. Rich ----- Original Message ----- From: Bob Verity To: jfw@xxxxxxxxxxxxx Sent: Monday, December 11, 2006 12:33 PM Subject: Re: replying privately to a list message with Jaws 8 Not correct. when replying to a list message: Control r will reply to the list control shift r will reply to everyone to whom the message was sent Jaws key shift r will reply to the original sender of the message only and not the list. above is for JFW 8