Re: jaws not behaving properly on restart or hibernate mode on laptop

  • From: "John Fioravanti" <fioresq1@xxxxxxxxxxx>
  • To: <jfw@xxxxxxxxxxxxx>
  • Date: Mon, 2 Aug 2010 20:22:17 -0400

Hi: So I suppose you simply shut down when you're finished with the laptop and 
live with it? It ashame because the standby or hibernate modes are so 
convenient.
  ----- Original Message ----- 
  From: Cy Selfridge 
  To: jfw@xxxxxxxxxxxxx 
  Sent: Monday, August 02, 2010 7:47 PM
  Subject: RE: jaws not behaving properly on restart or hibernate mode on laptop


  I use W7 64 bit, JAWS 11 and a HP Pavilion laptop.

  When it does come out of stand by mode not all things work as they should 
including Outlook 2007.

  The stand by or hybernate mode has been a problem as long as I can remember 
from JAWS 7 forward so i just do not do it.

  Cy, The Anasazi

   

  From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf Of 
GlenJan
  Sent: Monday, August 02, 2010 5:41 PM
  To: jfw@xxxxxxxxxxxxx
  Subject: Re: jaws not behaving properly on restart or hibernate mode on laptop

   

  No sorry I don't.  There is so much variation in configurations these days - 
particularly with laptops - that it's hard to know where to start.  
  I once spent two days trying to figure out why ZoomText wouldn't install on a 
laptop.  The culpret in the end was a little software widget which came with 
the laptop which was constantly scanning for a network printer.
  Two days to find the widget, 30 seconds to delete it.
  Glen


  .  There are so many variations with PC configs these days - particularly 
with laptops - that it's 

  On 3-Aug-2010 09:35, John Fioravanti wrote: 

  Thanks for your thoughts; however, do you have any idea Why this problem 
should occur simply with a restart as well?  

  John 

    ----- Original Message ----- 

    From: Bill White 

    To: jfw@xxxxxxxxxxxxx 

    Sent: Monday, August 02, 2010 7:31 PM

    Subject: Re: jaws not behaving properly on restart or hibernate mode on 
laptop

     

    I'm not an expert, but it sounds as if something is not being stored 
properly when you go into and exit from hybernate mode. 

     

    Incidentally, Freedom Scientific does not recommend using either stand-by 
or hybernate mode with JAWS. 

    Bill White billwhite92701@xxxxxxxxxxxxxx

      ----- Original Message ----- 

      From: John Fioravanti 

      To: jfw@xxxxxxxxxxxxx 

      Sent: Monday, August 02, 2010 3:13 PM

      Subject: jaws not behaving properly on restart or hibernate mode on laptop

       

      Hi: I am using jaws 10 on a toshiba laptop with xp pro. Recently I 
noticed that when I restart the laptop computer or come out of hibernate mode, 
the cursors (down and up arrows) in jaws are not behaving properly. In 
otherwords, e.g., when I go to date and time and move down to read the time 
setting, for instance, it does not read. Also, in word perfect 8, the cursors 
read a blank, although if I go one character at a time to the left it will read 
the letter.  

      Interestingly, when I shut down and turn the computer back on, everything 
works fine. Any ideas? Thanks in advance. John Fioravanti 

  -- JFW related links: JFW homepage: http://www.freedomscientific.com/ 
Scripting mailing list: 
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com JFW List 
instructions: To post a message to the list, send it to jfw@xxxxxxxxxxxxx To 
unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx 
with the word unsubscribe in the subject line. Archives located at: 
//www.freelists.org/archives/jfw Alternative archives located at: 
http://n2.nabble.com/JAWS-for-Windows-f2145279.html If you have any concerns 
about the list, post received from the list, or the way the list is being run, 
do not post them to the list. Rather contact the list owner at 
jfw-admins@xxxxxxxxxxxxxx

Other related posts: