Re: jaws not behaving properly on restart or hibernate mode on laptop
- From: "Bill White" <billwhite92701@xxxxxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Mon, 2 Aug 2010 16:32:21 -0700
I'm not an expert, but it sounds as if something is not being stored properly
when you go into and exit from hybernate mode.
Incidentally, Freedom Scientific does not recommend using either stand-by or
hybernate mode with JAWS.
Bill White billwhite92701@xxxxxxxxxxxxxx
----- Original Message -----
From: John Fioravanti
To: jfw@xxxxxxxxxxxxx
Sent: Monday, August 02, 2010 3:13 PM
Subject: jaws not behaving properly on restart or hibernate mode on laptop
Hi: I am using jaws 10 on a toshiba laptop with xp pro. Recently I noticed
that when I restart the laptop computer or come out of hibernate mode, the
cursors (down and up arrows) in jaws are not behaving properly. In otherwords,
e.g., when I go to date and time and move down to read the time setting, for
instance, it does not read. Also, in word perfect 8, the cursors read a blank,
although if I go one character at a time to the left it will read the letter.
Interestingly, when I shut down and turn the computer back on, everything
works fine. Any ideas? Thanks in advance. John Fioravanti
Other related posts:
