Re: jaws and ftp cliant
- From: "David Poehlman" <poehlman1@xxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Tue, 27 Jan 2004 10:38:25 -0500
I use the jaws cursor because say all is too verbose.
----- Original Message -----
From: "Bill Gallik" <wfgallik@xxxxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Monday, January 26, 2004 7:26 PM
Subject: Re: jaws and ftp cliant
Several additions I would like to point out to this reply:
1) You may need to enable "Speak All" in the resulting FTP window so JAWS
will tell you everything that is going on. It would also be a good idea to
maximize the FTP window.
2) You do not need to type in the destination, FTP will launch and you can
use the "open" command to open the ftp port to the desired machine. By the
way, the destination can be a alpha-numeric name (i.e.,
freedomscientific.com) or an IP address (255.255.255.155).
3) You should be able to type in the word "help" once in the FTP window and
a list of supported commands will be displayed. For help with a specific
command you should be able to enter in the specific command with a question
mark directly after it -- "open?"
4) Get help on mget (mget?) as this should allow you to do a Multiple Get!
----------------
Bill Gallik
E-Mail: wfgallik@xxxxxxxxxxxxx
"Do not follow where the path may lead. Go instead where there is no path
and leave a trail."
-Ralph Waldo Emerson
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Other related posts:
