Re: jaws 12:
- From: "Gary King" <w4wkz@xxxxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Thu, 28 Oct 2010 10:34:03 -0500
Curtis,
I went round and round with FS when they broke support for the version of
DEC Access32 purchased from GW Micro in the JFW 11 Final Release. It worked
all the way through the Public Beta of JFW 11 and in all previous versions
of JFW. They never admitted to doing anything to break this support. I
even wrote to Eric Damery, and he put me in touch with the JFW development
team. That didn't do any good either. Even after I explained that this
synthesizer had been working on my XP Home system for 5 years, they wanted
to blame it on the GW Micro installation. They also wanted me to help them
obtain a license for the synthesizer because they claimed they didn't own
it. Of course, no licenses are available now from GW Micro.
Now for the good news. I am still using DEC Access32 with both JFW 11 and
12. I'm not guarantying this method will work for anyone else. I have DEC
Access32 set to be my Default synthesizer. Unfortunately, this results in
Eloquence doing all the talking. By experimentation, I found that I could
open Default.jcf in my User Settings folder and enter 4 into the Active
equals line instead of the 5 that JFW uses for the DEC Access32 profile. I
was never able to figure out why this works, but it does for me. The
drawback to this work-around is that if I make any changes in the Voice
Profile, my entry of 4 is replaced with 5 again, and I have to perform the
replacement once more.
You can try this work-around for yourself, but I can't provide any further
help than I have provided here. I would be interested to know though if it
works for you.
Gary King
w4wkz@xxxxxxxxxxxxx
----- Original Message -----
From: "Curtis Delzer" <curtis@xxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Thursday, October 28, 2010 12:54 AM
Subject: RE: jaws 12:
Jaws 12? and why has FS given up support for Dec_access32 where it just
will not either work or if it does at all, it stops immediately. That is
what eleven did, and in tweleve, It will not even begin to work.
(xp of course). I am aware that Vista and Windows 7 cannot use
Dec_access32, but us XP users it works fine. JFW 10 has no problem with
it, but not 11 or 12.
Curtis Delzer.
HS.
to download the Haven cell phone tour.
in part or in whole
http://www.mysticplace.info/audio/haven
for 6000 plus ring tones.
http://www.sendspace.com/file/wch4yb
--
Currently in Fessenden, North Dakota Overcast, 26°F Wind:NNW-340° at 18mph
gusting to 24mph
A snail can sleep for 3 years.
Curtis Delzer
W B 6 H E F
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
Alternative archives located at:
http://n2.nabble.com/JAWS-for-Windows-f2145279.html
If you have any concerns about the list, post received from the list, or
the way the list is being run, do not post them to the list. Rather
contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
Alternative archives located at:
http://n2.nabble.com/JAWS-for-Windows-f2145279.html
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
