Re: got my cursor problem fixed
- From: "Troy Sullivan" <sullidog_2001@xxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Sat, 28 Feb 2004 23:16:04 -0500
Hi there. 52 but now that I've used it with the new setting, it's better but
it's still not 100 percent so I'm gonna try hier. If that's not 100 percent
still then I give up, but like I said play with it and it does make it a bit
better.
Troy
----- Original Message -----
From: "Zuhair Mah'd" <zuhairmahd@xxxxxxxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Saturday, February 28, 2004 8:25 PM
Subject: RE: got my cursor problem fixed
> Troy,
>
> What value worked for you?
>
> Regards.
>
>
>
> -----Original Message-----
> From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On =
> Behalf
> Of Troy Sullivan
> Sent: Saturday, February 28, 2004 5:14 PM
> To: jfw@xxxxxxxxxxxxx
> Subject: got my cursor problem fixed
>
>
> Hi all. Just wanted to say I got my cursor problem fixed and wanna post =
> here
> about it just in case someone else ever has the same problem. First, go =
> to
> control pannel, accessibility options, then control tab to display. Now =
> tab
> til you get to the blank cursor rait. Just play with this slider until =
> jaws
> starts reading how you want it. After you're done, tab to apply then ok.
> Troy
> --
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>
> If you have any concerns about the list, post received from the list, or =
> the
> way the list is being run, do not post them to the list. Rather contact =
> the
> list owner at jfw-admins@xxxxxxxxxxxxxx
>
> --
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>
> If you have any concerns about the list, post received from the list, or
the way the list is being run, do not post them to the list. Rather contact
the list owner at jfw-admins@xxxxxxxxxxxxxx
>
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
