Re: got my cursor problem fixed
- From: "Troy Sullivan" <sullidog_2001@xxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Sat, 28 Feb 2004 23:11:29 -0500
Hi there. I have my cursor blank rate set to 52 and it does still happen
every once in a while, but not as often as it was. I'm starting to think it
might be something with jaws itself as I said now that I've used my new
setting more often, I still notice it but not as much.
Troy
----- Original Message -----
From: "Grant Hardy" <grant_hardy@xxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Saturday, February 28, 2004 7:26 PM
Subject: RE: got my cursor problem fixed
> Troy,
>
> Is this the problem you were experiencing with forms not being read? If
so,
> I'm experiencing exactly the same problem and would be interested to know
> what you have your display set to.
>
>
> -Grant Hardy
> Email/MSN: grant_hardy@xxxxxxxxx
>
> -----Original Message-----
> From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx]On Behalf
Of
> Troy Sullivan
> Sent: Saturday, February 28, 2004 4:14 PM
> To: jfw@xxxxxxxxxxxxx
> Subject: got my cursor problem fixed
>
> Hi all. Just wanted to say I got my cursor problem fixed and wanna post
here
> about it just in case someone else ever has the same problem. First, go to
> control pannel, accessibility options, then control tab to display. Now
tab
> til you get to the blank cursor rait. Just play with this slider until
jaws
> starts reading how you want it. After you're done, tab to apply then ok.
> Troy
> --
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>
> If you have any concerns about the list, post received from the list, or
the
> way the list is being run, do not post them to the list. Rather contact
the
> list owner at jfw-admins@xxxxxxxxxxxxxx
>
> --
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>
> If you have any concerns about the list, post received from the list, or
the way the list is being run, do not post them to the list. Rather contact
the list owner at jfw-admins@xxxxxxxxxxxxxx
>
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
