The Current Access 32 download link and original TSN when Access 32 was posted (earlier download link)

From: <ptusing@xxxxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Date: Fri, 2 Apr 2004 11:26:31 -0500
Hi all,
The"  current"   link for Access 32 can be found at the Freedom Scientific
site under "Downlods"
then go to
JAWS and then go to
More downloads
where Access 32 is far down the list.
I installed JAWS 4.51  as a demo, then installed Access 32 and then
installed the authorization for JAWS.  Access 32 works great in X P and
worked before with every JAWS  version I ever used.
For people who want to see the    "original very old  TSN about  Access 32
and why it was   put on the web way   back long ago, there is a download
link for it  there as well. The  ppoint is the   old TSN  with  a link also
barely applies as so many use Access 32 with X P with JAWS 4.02 and above
and  also   with earlier operating systems like Win 95 and 98. the
synthesizer works great.

----- Original Message ----- 
Subject: installing decktalk access after purchasing a license
>
> Details of Selected Bulletin
>
> Bulletin Type: TSN Number: 38
>
> Date Posted: 10/15/2001
>
> Product Name: JAWS for Windows
>
> Version: 3.5
>
> Category: Synthesizers
>
> Short Description:
>
> Installing DECtalk Access32 After Purchasing a User License Henter-Joyce
>
> Problem:
>
> ACCESS32.EXE is provided on Diskette or can be downloaded using the link
at
> the bottom of the page.
>
> How To Install DECtalk Access32 After Purchasing a User License:
>
> Solution:
>
> JAWS 3.0 through JAWS 3.5 work with DECtalk Access32 in both the Microsoft
> Windows 95, 98 and NT environment provided you have a standard Windows
Sound
> Card properly installed and functioning.
>
> First, if you have not yet installed JAWS 3.0 or any later JAWS version,
do
> so now, before installing DECtalk Access32. (Install for the synthesizers
> that
> you wish to use. DECtalk Access32 does not need to be one of the chosen
> synthesizers, as the Access32.exe program will add it in automatically.)
>
> Second, if you did not get Access32 on a Disk from Henter-Joyce, but
rather
> it has been downloaded from the HJ FTP site, you may need to update your
> JAWS
> authorization for Access32 from Henter-Joyce to run. If you received an
ATH
> file to adjust your authorization, you should copy the ATH file into your
> JAWS
> directory. Auth Manager will then find the ATH file and update the
> authorization appropriately.
>
> Third, run ACCESS32.exe.
>
> ACCESS32.exe will extract itself to a temporary directory and then install
> itself in a three-step process:
>
> It will install the DECtalk Access32 software synthesizer to your system.
> It will add the necessary files and information to the JAWS directory.
> If required, it will update your authorization provided you have the
proper
> ATH file as described above.
> Then you will be prompted to either restart JAWS or reboot your computer
to
> incorporate the Access32 synthesizer into your system.
>
> Finally, Authorization to use Access32 is a requirement for all companies
> that distribute this product. If you wish to use the Access32 provided by
> Henter-Joyce
> in Windows 95/98/NT with any other program, the following conditions must
be
> met:
>
> The other application must provide for support of DECtalk Access32.
> JAWS must be installed with proper Authorization for Access32 and JAWS
must
> be loaded prior to running the other program. Note that it is suggested
that
> JAWS be instructed to go into Sleep Mode when you run the other
application
> to free Access32 for that program. This can be done with the JAWS
> configuration
> Manager, under Set Options, Advanced... You should do this when focused on
> the other application so the Configuration Manager will create the proper
> .jcf
> file. See the JAWS Help Menu, Customizing JAWS for more information on
this
> process.
>
> While this will work fine for Reading Systems, it is not recommended that
> you attempt to run two Screen Readers at the same time.
>
> Use the link below to download the install.txt file. Use the second link
to
> download DECtalk Access 32.
>
> Install.txt.
> ftp://ftp.henter-joyce.com/users/hj/synths/install.txt
>
> Download DECtalk Access32
> ftp://ftp.henter-joyce.com/users/hj/synths/access32.exe
>
> Search Our Knowledge Base
>
> Type in the word or phrase without quotation marks to search our entire
> knowledge base:
>
> Words
>
>

--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to 
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw

If you have any concerns about the list, post received from the list, or the 
way the list is being run, do not post them to the list. Rather contact the 
list owner at jfw-admins@xxxxxxxxxxxxxx
The Current Access 32 download link and original TSN when Access 32 was posted (earlier download link)

Other related posts:
