RE: Synthesizer Configuration Data
- From: "emarquette" <emarquette@xxxxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Sun, 16 May 2004 15:42:27 -0500
Steve:
Thanks for the information. Indeed, you were not guessing.
I was perhaps being too cautious, but I have encountered install
routines that set everything to the default settings.
I should have thought of the ini file.
Again, thanks.
I really think JAWS should have a built n function that displays this
information, but perhaps it is not needed all that often.
Ed Marquette
930 West 34th St.
Kansas City, MO 64111
(816) 561- 7111
-----Original Message-----
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On
Behalf Of Steve
Sent: Saturday, May 15, 2004 11:33 PM
To: jfw@xxxxxxxxxxxxx
Subject: Re: Synthesizer Configuration Data
Ed,
Go into your JFWxxx directory, where XXX is your version number. Open
the JFW.ini file in your notepad.
You'll ascertain therein that there is a list of synthesizers that you
elected to install, with their short and long names and port info. For
example, my jfw.ini indicates I have Dectalk Express, short name DTE,
comm port 1 9600 baud, no parity, 8 data bits, etc.
As you'll see, I wasn't guessing. (grin)
Steve Pollo
Lansing, MI
----- Original Message -----
From: "emarquette" <emarquette@xxxxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Saturday, May 15, 2004 11:09 PM
Subject: Synthesizer Configuration Data
How can I verify serial port synthesizer settings?
On my new office computer, after much trial and error (about a month
ago), I (and the technical support people at my new firm) got JAWS to
talk through my DecTalk Express. Now, I want to try a later version of
JAWS, and what I recall was the set of settings (e.g. com port, baud
rate, and the like) did not work. Can I go into synthesizer settings for
the older version (through the install utility) without screwing up the
settings that now work? Is there another way? Next time I will write
down and save the settings. If you know, thanks. If you are guessing,
well ....
Ed Marquette
930 West 34th St.
Kansas City, MO 64111
(816) 561- 7111
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or
the way the list is being run, do not post them to the list. Rather
contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or
the way the list is being run, do not post them to the list. Rather
contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
