RE: Setting different speech rates for different applications
- From: "Chris Jenkins" <saveup@xxxxxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Sat, 20 Jan 2007 00:01:03 -0500
Hello Ted.
It is not possible to change the synthesizer for a specific application
through the configuration manager. The only way to do this that I know of
is to have a set synthesizer statement written in the auto load event, of
the application that you want to make sure a specific speech synthesizer is
loaded. This used to be very popular before multichannel sound cards were
normal. At that time most people had single channel sound cards. We had a
hardware speech synthesizer that we used when we wanted to play streaming
audio with RealPlayer. So while focused on RealPlayer we would open the
script manager, right a autostart event, and place the set synthesizer
statement in the autostart event.
Once again you cannot set a specific speech synthesizer for a specific
application through the configuration manager. The change speech
synthesizer dialog box is grayed. You can only set the default speech
synthesizer from within default.JCS.
I hope this helps.
Chris.
-----Original Message-----
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf
Of Lisle, Ted (CHFS DMS)
Sent: Friday, January 19, 2007 10:11 AM
To: jfw@xxxxxxxxxxxxx
Subject: RE: Setting different speech rates for different applications
You can use different voices for different apps. Actually, you can use
different synth, if you wish; just use the synthesizer menu in Configuration
Manager to create custom configurations. Before you commit to anything, you
can always use the hot key combination to switch on the fly, and se what
works.
If you use Real Speak, you can change its speed unilaterally, either
globally or in individual app. It's a little harder to get some changes to
stick than Eric implies in his instructions, but it can be done, even if you
have to go through the voice menu, but that's probably a subject for another
time.
This app has gotten so flexible that you're limited by little more than your
desire and your imagination--a long way from the basic transportation of
JAWS 1.X.
Ted
-----Original Message-----
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf
Of stacey robinson
Sent: Friday, January 19, 2007 9:46 AM
To: jfw@xxxxxxxxxxxxx
Subject: Re: Setting different speech rates for different applications
Ted,
CAn you use diferent synths with different aps?
Stacey and GEB dog Chesley
staceyr75@xxxxxxxxxxxxx
----- Original Message -----
From: "Lisle, Ted (CHFS DMS)" <Ted.Lisle@xxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Friday, January 19, 2007 6:50 AM
Subject: RE: Setting different speech rates for different applications
> Neat, glad it worked. Of course, you can use different voices or
voice
> sets with different apps, if you're so inclined.
>
> Ted
>
> -----Original Message-----
> From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On
> Behalf Of stacey robinson
> Sent: Thursday, January 18, 2007 4:06 PM
> To: jfw@xxxxxxxxxxxxx
> Subject: Re: Setting different speech rates for different applications
>
>
> Hi Ted,
> Ok, I've got it. Yes,I'm th gorl with the new notebook.
>
>
> Stacey and GEB dog Chesley
>
> staceyr75@xxxxxxxxxxxxx
> ----- Original Message -----
> From: "Lisle, Ted (CHFS DMS)" <Ted.Lisle@xxxxxx>
> To: <jfw@xxxxxxxxxxxxx>
> Sent: Thursday, January 18, 2007 2:07 PM
> Subject: RE: Stting different speech rates for different applications
>
>
>> Yes. Use the main JFW menu, under Voices. You must do this when
>> Outlook is running. If you have several apps running, go directly
> from
>> Outlook to JAWS, with Numpad Ins-J (substitute your JAWS key of
> choice,
>> if you have mapped a different one--I seem to recall you're the girl
>> with the new notebook).
>>
>> On the first screen, choose "Global," if you want all voices (the
>> cursors, keyboard, and messages) to be affected. Then choose
Outlook,
>> when given the choice of Outlook or Default.
>>
>> Ted
>>
>> -----Original Message-----
>> From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On
>> Behalf Of stacey robinson
>> Sent: Thursday, January 18, 2007 2:49 PM
>> To: jaws
>> Subject: Stting different speech rates for different applications
>>
>>
>> Hi all,
>> Is there any way that I can tell jaws to always speak faster when in
>> outlook
>> express? I know how to change rate on the fly with page up and down,
>> but
>> I'd like to always have elliquence at a faster rate when I'm in
> outlook
>> express. CAn I do this and how?
>>
>> Stacey and GEB dog Chesley
>>
>> staceyr75@xxxxxxxxxxxxx
>>
>>
>> --
>> JFW related links:
>> JFW homepage: http://www.freedomscientific.com/
>> Scripting mailing list:
>> http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
>> JFW List instructions:
>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>> To unsubscribe from this mailing list, send a message to
>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
> line.
>> Archives located at: //www.freelists.org/archives/jfw
>>
>> If you have any concerns about the list, post received from the list,
> or
>> the way the list is being run, do not post them to the list. Rather
>> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>> --
>> JFW related links:
>> JFW homepage: http://www.freedomscientific.com/
>> Scripting mailing list:
>> http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
>> JFW List instructions:
>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>> To unsubscribe from this mailing list, send a message to
>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
> line.
>> Archives located at: //www.freelists.org/archives/jfw
>>
>> If you have any concerns about the list, post received from the list,
> or
>> the way the list is being run, do not post them to the list. Rather
>> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>>
>
>
> --
> JFW related links:
> JFW homepage: http://www.freedomscientific.com/
> Scripting mailing list:
> http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
> JFW List instructions:
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list,
or
> the way the list is being run, do not post them to the list. Rather
> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
> --
> JFW related links:
> JFW homepage: http://www.freedomscientific.com/
> Scripting mailing list:
> http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
> JFW List instructions:
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list,
or
> the way the list is being run, do not post them to the list. Rather
> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or
the way the list is being run, do not post them to the list. Rather
contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
__________ NOD32 1990 (20070119) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
