Save it like you do with other scanned document, then exit Open Book and send it like you would with any other file. Joe ________________________________ From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf Of Randy Campbell Sent: Tuesday, March 17, 2009 4:41 PM To: jfw@xxxxxxxxxxxxx Subject: Re: Scanning A Picture and Sending It Using JAWS or Openbook Okay, then how do you send the scanned picture? Randy ----- Original Message ----- From: Roeder, Joe <mailto:Jroeder@xxxxxxx> To: jfw@xxxxxxxxxxxxx Sent: Tuesday, March 17, 2009 1:18 PM Subject: RE: Scanning A Picture and Sending It Using JAWS or Openbook Open Book can scan image files of PCX or TIF formats. Under the setting menu select Scanning options. In the Scanning options dialog, change scanning mode to image only, and change the image format to the one you want. Close the dialog and perform the scan as usual. Joe ________________________________ From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf Of Dan Kerstetter Sent: Tuesday, March 17, 2009 12:55 PM To: jfw@xxxxxxxxxxxxx Subject: RE: Scanning A Picture and Sending It Using JAWS or Openbook I'm not sure whether Open Book can scan pictures or not, but if you can figure out how to use it, the software that came with your scanner is probably good for pictures. That's how I scan pictures and send them. HTH Dan Kerstetter ________________________________ From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf Of Randy Campbell Sent: Monday, March 16, 2009 9:51 PM To: jfw Subject: Scanning A Picture and Sending It Using JAWS or Openbook I was wondering if anybody could help me with this. I'm trying to scann a picture using openbook and then I want to send it to my sighted friend. Is there a way to do this or not? Thank you. Randy Campbell