Don't think so. I think that is intentional because 1- images can be large files, and 2- image files probably do not have page break codes to separate into pages. Joe ________________________________ From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf Of John Fioravanti Sent: Tuesday, March 17, 2009 2:34 PM To: jfw@xxxxxxxxxxxxx Subject: Re: Scanning A Picture and Sending It Using JAWS or Openbook Joe: when I do that it seems that each page or picture you do you must give it a file name, in otherwords, I can't scan more than one page at a time. Is there a way around this? John Fioravanti ----- Original Message ----- From: Roeder, Joe <mailto:Jroeder@xxxxxxx> To: jfw@xxxxxxxxxxxxx Sent: Tuesday, March 17, 2009 2:18 PM Subject: RE: Scanning A Picture and Sending It Using JAWS or Openbook Open Book can scan image files of PCX or TIF formats. Under the setting menu select Scanning options. In the Scanning options dialog, change scanning mode to image only, and change the image format to the one you want. Close the dialog and perform the scan as usual. Joe ________________________________ From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf Of Dan Kerstetter Sent: Tuesday, March 17, 2009 12:55 PM To: jfw@xxxxxxxxxxxxx Subject: RE: Scanning A Picture and Sending It Using JAWS or Openbook I'm not sure whether Open Book can scan pictures or not, but if you can figure out how to use it, the software that came with your scanner is probably good for pictures. That's how I scan pictures and send them. HTH Dan Kerstetter ________________________________ From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf Of Randy Campbell Sent: Monday, March 16, 2009 9:51 PM To: jfw Subject: Scanning A Picture and Sending It Using JAWS or Openbook I was wondering if anybody could help me with this. I'm trying to scann a picture using openbook and then I want to send it to my sighted friend. Is there a way to do this or not? Thank you. Randy Campbell