Hi Alex and all, That is exactly what I had done, but I would like, lie in previus versions, JAWS to say for example "bold" or "italic" rather than using a different voice for bold or italic, because I found those voices unpleasant. Hoping to hear from you again, \Gezim From: Alex Midence Sent: Wednesday, June 23, 2010 7:30 PM To: jfw@xxxxxxxxxxxxx Subject: RE: Reading attributes From your application, do the following: 1. Hit Jaws key +f2 and scroll down till you hear Configuration manager. Hit enter. 2. From the configuration manager once you are in the application-specific dot jcf file, hit alt+u for the user options menu. 3. Arrow down to Speech and sounds Manager and select it. 4. Hit home to take you to the top of the list. The third, fourth and fifth options on the list are where you want to be. You can have Jaws read attributes only, attributes and fonts, or attributes fonts and colors. You can hit the tab key on each one and you'll go into a read-only field where you can hear or read a description oof how Jaws handles it. 5. Hit the one you want and close the configuration manager making sure to save your changes. You should be in business now. Hope that helps, Alex From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf Of Gezim Rexha Sent: Wednesday, June 23, 2010 9:32 AM To: jfw@xxxxxxxxxxxxx Subject: Reading attributes Hi all, How can I make JAWS announce attributes, for instance to say "bold" or "italic" instead of using a different voice for different attributes? Cheers, Gezim