Re: Jaws reading bolded text
- From: "Troy Burnham" <tburnham@xxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Fri, 17 Jun 2005 18:43:14 -0500
Hi Debbie,
How do I get to the classic attributes though, it wasn't listed in the same
list with Classic. Smile.
Troy
----- Original Message -----
From: Debbie Kessler
To: jfw@xxxxxxxxxxxxx
Sent: Friday, June 17, 2005 4:25 PM
Subject: Re: Jaws reading bolded text
I apologize if my instructions were not as complete as they could have been.
My instructions to have JAWS read bolded text were based on JAWS 6.0 in MSWord.
I use Word 2003 at work and Word 2000 at home.
To access the JAWS Scheme dialog box is to press "alt + insert + S". The dialog
box opens in a list with "classic" as the default. I instructed that one should
select "classic (attributes).
JAWS will acknowledge the bolded text as bold and the italics text as italics.
Attributes includes italics, underline, and bold. To know where these changes
start and end, JAWS will speak the attribute first and then the text. Because
the default in Word is "normal" when the attribute goes back to the original,
that is without being italics, underline, or bold, JAWS will read "Normal".
I left out how to change the settings back to the default in the case you did
not like this option after all. If you find this more confusing than worth
having bold read to you; you can go back into the scheme dialog box and select
"classic", which is the JAWS default.
Other classic choices where even more information is spoken are:
Classic (attributes, font info., & color)
Classic with quotes
Now, with my settings on "attributes", my JAWS is also reading "strikethrough".
My "font" dialog box does not indicate the strikethrough checkbox as being
checked.
If this is not clear, or what you get is not what you expected, please consult
your help for JAWS.
Tip: Before changing a setting, check as to the default or at least what it is
prior to making the change so you can go back and set it back.
Again, I hope this helps.
Debbie
----- Original Message -----
From: ptusing@xxxxxxxxxxxxx
To: jfw@xxxxxxxxxxxxx
Sent: Friday, June 17, 2005 12:18 PM
Subject: Re: Jaws reading bolded text
Hi,
I followed these instructions and found myself
really messed up.
I am sure it must have been my fault and the kind folksat tech support
couldnot help meo ut.
If you find your key operations nonresponsive, immediately close down JAWS
6.1 and restart it.
Everything fixes then.
I am sure the mistake was mine andd this is why I say if in trouble, close
JAWS before you mess up further settings.
----- Original Message -----
From: "Troy Burnham" <tburnham@xxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Friday, June 17, 2005 1:37 PM
Subject: Re: Jaws reading bolded text
> Hi All,
> I asked the other day if Jaws could be made to tell me what text is in
> bold
> type when reading in MSWord because that is the way that the company that
> I
> now work for lets us know what we did wrong, they put the corrections in
> bold type.
>
> The below message tells me to hit alt-insert-S and choose classic and that
> it should work, but I got some corrections today and although there is
> some
> bolded text in the report Jaws isn't indicating the bolded text in any
> way.
> Can anybody give me further help on what to do here?
>
> Thanks.
> Troy
>
>
> ----- Original Message -----
> From: "Debbie Kessler" <jessesgirl@xxxxxxxxxxxxx>
> To: <jfw@xxxxxxxxxxxxx>
> Sent: Tuesday, June 14, 2005 5:54 PM
> Subject: Re: Jaws reading bolded text
>
>
> Hi Troy;
> Go to the sceem dialog box with "alt + insert + s".
> Select "clasic (atributes)
> Hope this helps.
> Debbie
> ----- Original Message -----
> From: Troy Burnham
> To: jfw
> Sent: Tuesday, June 14, 2005 3:07 PM
> Subject: Jaws reading bolded text
>
> Hi All,
> If I'm reading a document in MSWord that has bolded words in it is there
> any
> way to do something so that Jaws will notify me when it comes across a
> bolded word?
>
> I'm asking this because I just went to work yesterday for a medical
> transcription company that when they give corrections on the reports the
> corrected portion is in bold type.
>
> Thanks.
> Troy
>
> --
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list, or
> the way the list is being run, do not post them to the list. Rather
> contact
> the list owner at jfw-admins@xxxxxxxxxxxxxx
> --
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list, or
> the
> way the list is being run, do not post them to the list. Rather contact
> the
> list owner at jfw-admins@xxxxxxxxxxxxxx
>
> --
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list, or
> the way the list is being run, do not post them to the list. Rather
> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
