MessageHi, I did not know that you could make this selection in Nero. I have version 7 ultra and will have to check it out. I do know that you can enter the properties for your particular drive and in there is a combo box which you can set this option to. See if that helps. Rich ----- Original Message ----- From: John Ramsey To: jfw@xxxxxxxxxxxxx Sent: Friday, May 18, 2007 11:54 AM Subject: RE: JFW and DVD Burners Hi Rich, Where am I setting it to 8x I have that done in Nero settings, actually, i usually use 4x in Nero. Take care, John -----Original Message----- From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf Of Richard Sherman Sent: Friday, May 18, 2007 2:51 PM To: jfw@xxxxxxxxxxxxx Subject: Re: JFW and DVD Burners Hi, Not a problem with your burner, Nero, or jaws. I believe that the problem is the media type. You have 8x DVD's for burning and your DVD drive is set too high. Just put it back to 8x and you should have no other problems. I personally have mine set to 4x as to have better burning quality with less problems. Rich ----- Original Message ----- From: John Ramsey To: jfw@xxxxxxxxxxxxx Sent: Friday, May 18, 2007 11:14 AM Subject: JFW and DVD Burners Hello All, I have recently encountered a strange problem. I have tried to burn a 16x DVD-R in my DVD Burner and Nero just ejects the DVD saying that it is the wrong speed or type. I can burn 8x DVD-R just fine and don't know if this is a glitch in Nero, or if I need a different burner. If I do need a different burner, I was wondering if any of you have had any luck using an external USB DVD burner. If so, was there any difficulty with the installation software and JFW? Finally, if you know of an accessible external USB DVD burner, what is the brand and model? Take care, John