RE: JFW and DVD Burners

  • From: "John Ramsey" <stephnjohnny211@xxxxxxxxxx>
  • To: <jfw@xxxxxxxxxxxxx>
  • Date: Fri, 18 May 2007 14:54:39 -0400

Hi Rich,
Where am I setting it to 8x I have that done in Nero settings, actually, i
usually use 4x in Nero.
Take care,

-----Original Message-----
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf
Of Richard Sherman
Sent: Friday, May 18, 2007 2:51 PM
To: jfw@xxxxxxxxxxxxx
Subject: Re: JFW and DVD Burners

Not a problem with your burner, Nero, or jaws. I believe that the problem is
the media type. You have 8x DVD's for burning and your DVD drive is set too
high. Just put it back to 8x and you should have  no other problems.
I personally have mine set to 4x as to have better burning quality with less

----- Original Message ----- 
From: John Ramsey <mailto:stephnjohnny211@xxxxxxxxxx>  
To: jfw@xxxxxxxxxxxxx 
Sent: Friday, May 18, 2007 11:14 AM
Subject: JFW and DVD Burners

Hello All,
I have recently encountered a strange problem. I have tried to burn a 16x
DVD-R in my DVD Burner and Nero just ejects the DVD saying that it is the
wrong speed or type. I can burn 8x DVD-R just fine and don't know if this is
a glitch in Nero, or if I need a different burner.
If I do need a different burner, I was wondering if any of you have had any
luck using an external USB DVD burner. If so, was there any difficulty with
the installation software and JFW? Finally, if you know of an accessible
external USB DVD burner, what is the brand and model?
Take care,

Other related posts: