JAWS loosing focus

  • From: "Keith Christian" <KChristian@xxxxxxxxxxxxxx>
  • To: <jfw@xxxxxxxxxxxxx>
  • Date: Thu, 13 May 2004 09:26:55 -0700

Hi Steve,

I have been playing with the resolution  and it has not made a
difference. I have used 800 by 600 and the higher resolution ones as
well.  I am now trying the 16 vs. 32 bit=20
I have tried both standard and Windows classic settings. But I just
can't
get this working correctly.  =20

I am running Windows XPHome and JAWS 5.0844

Perhaps I should get a list of what are ideal settings and start there.
I had this computer set up for using Sonar and Sonar Talking.  Now I
have really made a mess of the display settings.  I am not looking
forward to seeing if it is still working.


Thanks,

Keith

From: "Steve Britt" <swimmer953@xxxxxxxxxxxxx>
Subject: Re: JAWS loosing focus
Date: Tue, 11 May 2004 13:24:36 -0500

All right, Keith; first off, what version of Windows do you have? Then,
secondly, what is your screen resolution? is it 800 by 600, or 640 by
480? (these are just two possible settings.) Third, is your display set
at Windows standard or Windows classic?

----- Original Message -----=20
From: "Keith Christian" <KChristian@xxxxxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Monday, May 10, 2004 1:25 PM
Subject: JAWS loosing focus


> Hi,
> My JAWS keeps loosing focus.  Sometimes the insert escape will refresh

> the screen but not always.  I have a new Dell computer and it seemed=20
> to be working  fine when I first got it, but it is getting worse.
> Could it be the video card?  It is an Intel 82865 G Graphics
Controller.
> I am thinking this might be the problem, but I don't want to buy one
> just to find
> out it is not.
> I am using the 5.0844 version of JAWS and I can't continue working
this
> way...  Office is 2003 and Duxbury 10.4.
> Your thoughts are appreciated.
> Thank you,
> Keith
> --
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to 
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw

If you have any concerns about the list, post received from the list, or the 
way the list is being run, do not post them to the list. Rather contact the 
list owner at jfw-admins@xxxxxxxxxxxxxx

Other related posts: