Re: JAWS and Home Networks

  • From: "Mark Arnold" <marnold@xxxxxxxxxxx>
  • To: <jfw@xxxxxxxxxxxxx>
  • Date: Thu, 3 May 2007 20:23:51 -0400

Try routing the JAWS Curser to the PC Curser and do the left click command.  
Hope this helps...

  ----- Original Message ----- 
  From: Chris Toomer 
  To: jfw@xxxxxxxxxxxxx 
  Sent: Thursday, May 03, 2007 7:56 PM
  Subject: JAWS and Home Networks

  Hi Folks,

  I am trying to set up a wireless home network in my home and have run into a 
JAWS issue that I hope someone can help me with.

  While setting up an access filter to restrict who can access my network and 
go out on the internet, I tried to click on a button that would allow me to see 
the connected devices and me to allow or disallow the particular device. When I 
try to hit the enter key on the connect button or the space bar, nothing 

  Does anyone know how I can get around the above issue with JAWS and not have 
to rely on sighted assistance? I'm using a Linksys WCG 200. If there is a 
better cable modem/router out there that works better with JAWS, I would like 
to know about it. This modem/router was provider by my cable provider.


Other related posts: