RE: JAWS 7.0 And Two Sound Cards

  • From: "Jim Grimsby" <jimgrims@xxxxxxxxxxx>
  • To: <jfw@xxxxxxxxxxxxx>
  • Date: Thu, 29 Dec 2005 10:50:54 -0800

hi, 
after you change the volume on the first card using the volume control
go in to option select properties now you will see a list of mixers
select your sound blaster and press enter
now adjust the volume for this card as well.  
hth 
 
 

jim grimsby
msn: jim.grimsby@xxxxxxx
email:  jimgrims@xxxxxxxxxxx
skype: jim.grimsby 

-----Original Message-----
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On
Behalf Of Steven Hicks
Sent: Thursday, December 29, 2005 9:23 AM
To: jfw@xxxxxxxxxxxxx
Subject: JAWS 7.0 And Two Sound Cards


Hello,
 
I wonder if you can help me please?  I have Microsoft Windows XP, JAWS
7.0 and two sound cards.  The first sound card is the one on the
motherboard which I use for audio and the second is a SBLive 1024 PCI
card which I run JAWS through.
I have JAWS working fine after editing the JFW.INI file and installing
the updated Eloq file.  The only problem is that when I go in to the
sound properties and make changes to the sound volume, they only change
the volume on the on board sound and don't seem to turn up the volume
for JAWS on the PCI sound card.
Is there something that I am missing here please?
Is there any way that i can get around this problem please?
 
Many thanks in anticipation for any help that you can give,
 
Steve.

Other related posts: