RE: Eloquence

  • From: "Horspool, Matthew F." <drjaws@xxxxxxxxxxxxxxxx>
  • To: <jfw@xxxxxxxxxxxxx>
  • Date: Tue, 28 Dec 2004 10:05:11 -0000

Differing opinions here!  I actually liked the Eloquence from 3.2.  Then
they changed it in 3.3, 3.7 and 4.5

-------------------------
Mr. Matthew F. Horspool
 
Send me an Electronic Mail to
drjaws@xxxxxxxxxxxxxxxx
 
Add
horspool@xxxxxxxxxxxxxxxx
to your MSN contact list
 
Or Visit my web site at
http://www.horspool.pwp.blueyonder.co.uk
-------------------------


-----Original Message-----
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On
Behalf Of Jack Lowe
Sent: Monday, December 27, 2004 10:15 PM
To: jfw@xxxxxxxxxxxxx
Subject: Re: Replacing Voices


Now you have me curious.  I'll have to go back and check that out.  I 
started back in 1999 with Jaws 3.0.  And, as soon as my piggy bank will 
allow, I will put out the money for my SMA of Jaws 6.0 as my SMA's have
run 
out.    Jack
----- Original Message ----- 
From: "John Miller" <n1umj@xxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Monday, December 27, 2004 4:47 PM
Subject: Re: Replacing Voices


> No,  no they're not,  3.2 was disgusting right across the board, or 
> the
> wade
> voice was horrible as were the rest. Personally though I find the
default
> voice the only one I can stand now, but with 3.2 I couldn't stand any
of
> them.
> ----- Original Message ----- 
> From: "Jack Lowe" <akronjack1982@xxxxxxxxxxxxx>
> To: <jfw@xxxxxxxxxxxxx>
> Sent: Monday, December 27, 2004 4:22 PM
> Subject: Re: Replacing Voices
>
>
>> Yes, but all of the eloquence voices are the same in all versions of 
>> Jaws up to 4.02.  After that, they changed the Rocco voice.  All of 
>> the others are
>> the same as always.   Jack
>> ----- Original Message ----- 
>> From: "Horspool, Matthew F." <drjaws@xxxxxxxxxxxxxxxx>
>> To: <jfw@xxxxxxxxxxxxx>
>> Sent: Monday, December 27, 2004 3:58 PM
>> Subject: RE: Replacing Voices
>>
>>
>>> So does this mean that you can take Eloquence from JAWS 3.2 and 
>>> import it to JAWS 4.51?  Or possibly later?
>>>
>>> -------------------------
>>> Mr. Matthew F. Horspool
>>>
>>> Send me an Electronic Mail to
>>> drjaws@xxxxxxxxxxxxxxxx
>>>
>>> Add
>>> horspool@xxxxxxxxxxxxxxxx
>>> to your MSN contact list
>>>
>>> Or Visit my web site at http://www.horspool.pwp.blueyonder.co.uk
>>> -------------------------
>>>
>>>
>>> -----Original Message-----
>>> From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On
>>> Behalf Of Jack Lowe
>>> Sent: Sunday, December 26, 2004 10:58 PM
>>> To: jfw@xxxxxxxxxxxxx
>>> Subject: Re: Rocco Voice
>>>
>>>
>>> Yes, you can replace the new Rocco voice with the old one, and
here's
>>> how... First of all, you'll need an old version of Jaws on CD.
Version
>>> 4.02 or
>>> older.  I have the file saved if anyone would want it.  I don't know
if
>>> this
>>> group allows attachments or not.
>>> Anyway, the name of the Rocco voice file is ECI.INI.  Here's how you
>>> replace
>>> the new one with the old one.
>>> I do have to say that I haven't tried this with 6.0 yet because the
>>> files
>>> aren't in the same place as they've been in past versions.  But i'm
sure
>>>
>>> that you can do this in 6.0 as well.
>>> First, get a copy of the old ECI.INI file.
>>> Then, go to drive C and look for your Jaws program.  Mine says Jaws
510.
>>> Open that folder and paste the original ECI.INI file into that
folder.
>>> It
>>> will ask you if you want to replace one with the other.  Tell it
yes.
>>> Now you can exit out of there. Now, close Jaws with incert F4, then
>>> restart it.  The old rocco voice will
>>> be there when the program restarts.    Jack
>>>
>>> ----- Original Message ----- 
>>> From: "Chris & Mary" <cmchaffin@xxxxxxxxxxxx>
>>> To: <jfw@xxxxxxxxxxxxx>
>>> Sent: Sunday, December 26, 2004 5:43 PM
>>> Subject: Re: Rocco Voice
>>>
>>>
>>>> Hi there,
>>>> I was not aware that you could take a voice from one Jaws and
replace
>>>> it with an older version of the same voice. Could you please
explain
>>>> the steps in doing this? Thanks in advance,
>>>> Chris Chaffin
>>>>
>>>> ----- Original Message -----
>>>> From: "Jack Lowe" <akronjack1982@xxxxxxxxxxxxx>
>>>> To: <jfw@xxxxxxxxxxxxx>
>>>> Sent: Sunday, December 26, 2004 4:37 PM
>>>> Subject: Rocco Voice
>>>>
>>>>
>>>>> Hey Everyone,
>>>>> I've mentioned this to a few other people and I was wondering...
Is
>>>>> it just me, or is the newer Rocco voice really offal!  Well, I've
>>>>> found a way around that.  I went back to Jaws 4.02, before they
>>>>> changed it, and took the original Rocco voice and incorporated it
>>>>> into my current version of Jaws.  Now, I haven't tried this with
6.0
>>>>> yet, but it works just great with 5.10.  The newer voice sounds
like
>>>>> he has a mouth full of marbles. I
>>>>> really like the original version of Rocco much better.   Jack
>>>>> --
>>>>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>>>>> To unsubscribe from this mailing list, send a message to
>>>>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
>>> line.
>>>>> Archives located at: //www.freelists.org/archives/jfw
>>>>>
>>>>> If you have any concerns about the list, post received from the
list,
>>>
>>>>> or the way the list is being run, do not post them to the list.
>>>>> Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>>>>>
>>>>
>>>> --
>>>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx To
>>>> unsubscribe from this mailing list, send a message to
>>>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
>>>> line. Archives located at: //www.freelists.org/archives/jfw
>>>>
>>>> If you have any concerns about the list, post received from the
list,
>>>> or
>>>> the way the list is being run, do not post them to the list. Rather
>>>> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>>>
>>> --
>>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>>> To unsubscribe from this mailing list, send a message to
>>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
line.
>>> Archives located at: //www.freelists.org/archives/jfw
>>>
>>> If you have any concerns about the list, post received from the
list, or
>>> the way the list is being run, do not post them to the list. Rather
>>> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>>>
>>>
>>> --
>>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>>> To unsubscribe from this mailing list, send a message to
>>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
line.
>>> Archives located at: //www.freelists.org/archives/jfw
>>>
>>> If you have any concerns about the list, post received from the
list, or
>>> the way the list is being run, do not post them to the list. Rather
>>> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>>
>> --
>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>> To unsubscribe from this mailing list, send a message to
>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
line.
>> Archives located at: //www.freelists.org/archives/jfw
>>
>> If you have any concerns about the list, post received from the list,
or
>> the way the list is being run, do not post them to the list. Rather
>> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>>
>
>
> --
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to 
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list,
or 
> the way the list is being run, do not post them to the list. Rather 
> contact the list owner at jfw-admins@xxxxxxxxxxxxxx 

--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw

If you have any concerns about the list, post received from the list, or
the way the list is being run, do not post them to the list. Rather
contact the list owner at jfw-admins@xxxxxxxxxxxxxx

--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to 
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw

If you have any concerns about the list, post received from the list, or the 
way the list is being run, do not post them to the list. Rather contact the 
list owner at jfw-admins@xxxxxxxxxxxxxx

Other related posts:

  • » RE: Eloquence