Re: Dongle and ILM
- From: "Steve Vandecar" <kg7ed@xxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Thu, 24 Feb 2005 20:37:46 -0800
I got my dongle to use with 5.0 and when I installed the ILM version of JAWS
6 it authorized and worked fine
----- Original Message -----
From: "John Miller" <n1umj@xxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Thursday, February 24, 2005 7:23 PM
Subject: Re: Dongle and ILM
> ILM is the way we authorize jaws now with the CD you put in and/or the
> string of 20 numbers, and the dongle was what they've used the last a
> couple years for those that didn't have a floppy disk drive for the older
> authorization, they came up with the dongle that plugs in to the USB port
> to authorize jaws but now that we have ILM which is actually done over the
> internet, with that 20 digit code I don't think we'll see dongles anymore
> except in unusual situations if at all. I'm hanging on to my dongle
> version
> of jaws 5.0 because I work on computers a lot, enough that I need
> something
> like that, the demo works some times but it's just not enough if you're in
> a
> major diagnostic situation
> ----- Original Message -----
> From: "Yardbird" <yardbird@xxxxxxxxxxxxxx>
> To: <jfw@xxxxxxxxxxxxx>
> Sent: Thursday, February 24, 2005 9:53 PM
> Subject: Re: Dongle and ILM
>
>
>> Sorry for so many questions? Wait until you hear this: What's a dongle?
>> What's an ILM?
>>
>> thanks.
>>
>> ----- Original Message -----
>> From: "Jack Lowe" <akronjack1982@xxxxxxxxxxxxx>
>> To: <jfw@xxxxxxxxxxxxx>
>> Sent: Thursday, February 24, 2005 6:42 PM
>> Subject: Dongle and ILM
>>
>>
>>> Content-Type: text/plain;
>>> charset="Windows-1252"
>>> Content-Transfer-Encoding: quoted-printable
>>> Hey All,
>>>
>>> I was wondering something... Is there a way that I can get a dongle for
>>> =
>>> my Jaws 6.0? Here's my reason for asking. I may be doing lots of work
>>> =
>>> on my computer and I will easily go through my ILM's for Jaws. =20
>>> So, would having a dongle resolves this problem? Another thing, is the
>>> =
>>> dongle good for any computer with Jaws 6.0, or is it exclusively for my
>>> =
>>> computer alone. I guess I should call FS and find out.
>>> It just seems that having the ability to plug in the dongle wuld be much
>>> =
>>> easier. Then once all the work is done, I can reinstall the ILM.
>>> And what happens if you put the dongle into another computer with 6.0, =
>>> does Jaws refuse it?
>>> Sorry for so many questions. Jack =20
>>>
>>>
>>>
>>>
>>> --
>>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>>> To unsubscribe from this mailing list, send a message to
>>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>>> Archives located at: //www.freelists.org/archives/jfw
>>>
>>> If you have any concerns about the list, post received from the list, or
>>> the way the list is being run, do not post them to the list. Rather
>>> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>>>
>>>
>>>
>>> --
>>> No virus found in this incoming message.
>>> Checked by AVG Anti-Virus.
>>> Version: 7.0.300 / Virus Database: 266.4.0 - Release Date: 2/22/2005
>>>
>>>
>>
>>
>>
>> --
>> No virus found in this outgoing message.
>> Checked by AVG Anti-Virus.
>> Version: 7.0.300 / Virus Database: 266.4.0 - Release Date: 2/22/2005
>>
>> --
>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>> To unsubscribe from this mailing list, send a message to
>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>> Archives located at: //www.freelists.org/archives/jfw
>>
>> If you have any concerns about the list, post received from the list, or
>> the way the list is being run, do not post them to the list. Rather
>> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>>
>
>
> --
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list, or
> the way the list is being run, do not post them to the list. Rather
> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
