RE: David the creator of the winamp scripts
- From: "Jim Grimsby JR." <jimgrims@xxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Mon, 19 Jun 2006 02:02:49 -0700
Hi Chris these scripts are intended to be an update.
It sounds to me like you may have removed some things included in the jaws
distribution most probably the winamp active x control.
If the winamp active x control is not installed then the scripts you speak
of will not work. Please note none of the scripts you speak of were changed
by me in any way. So my guess would be you may have removed the active x
control.
These scripts were tested with both 5.1 and 7.0 they worked fine with no
problems.
Hth
Jim Grimsby JR.
Msn: jim.grimsby@xxxxxxx
e-mail: jimgrims@xxxxxxxxxxx
Skype: jim.grimsby
-----Original Message-----
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf
Of Chris Skarstad
Sent: Sunday, June 18, 2006 7:40 PM
To: jfw@xxxxxxxxxxxxx
Subject: RE: David the creator of the winamp scripts
hi. As I posted to the Winamp4TheBlind list I run, unfortunately
these updated scripts do not work well at all on my system. In fact,
they seem to have broken some of the other scripts included before,
most notably the speak total time of the currently playing track and
the elapsed time of the currently playing track, as well as a few
other things like speak status of stop before next track. Those were
the only things I found. Since i make great use of these functions
in my broadcasting, I could not very well keep these scripts. So,
luckily for me, I had a previous version of JAWS on my system, which
I went backto and copied the scripts over to 7.0 which is what I use
currently. So folks, if you try these scripts, it would be a very
good idea for anyone trying out these to copy the current ones into a
folder on your hard drive. That way if something bad happens as it
did on my system here, you can go back. I did and the scripts work
again just as they did before. Note that before reverting back to
the other scripts, I recompiled the scripts and closed and restarted
JAWS in hopes that this would do the trick. However, they just did
not work for me, sorry to say.
Just thought I would share my experiences. I hope some of you have
better luck than me!
At 07:35 PM 6/18/2006, you wrote:
>HI Jim,
>
>Thanks for thinking of us. The truth is that we have always been in
>favour of script development / updates. All we asked was that the
>necessary credits be given for any prior work on the updated scripts
>and that we can get access to them. So you haven't stepped on any
>toes at all. With regards to FS, since we gave them permission to
>use our scripts in the distribution of Jaws, any updates if made by
>other contributors and if that contributor wanted their updates to
>be included in the Jaws distribution then we felt it'd be better if
>they got in contact with FS directly as they were more in a position
>to explain their updates in detail.
>
>I hope that explains our position clearly enough.
>
>
>David Truong
>
>E-mail and MS messenger: davidtruong@xxxxxxxxxxxxxxx
>
>Skype: blindboxer1967
>
>Home
>Page:
><http://members.optusnet.com.au/davidtruong/>http://members.optusnet.com.au
/davidtruong/
>
>
>
>
>----------
>From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On
>Behalf Of Jim Grimsby JR.
>Sent: Monday, June 19, 2006 9:36 AM
>To: jfw@xxxxxxxxxxxxx
>Subject: RE: David the creator of the winamp scripts
>
>here they are
>
>hi I sent them to Bruce he will send them to you.
>I also sent them to debby who will post them on her site in the mean
>time. as far as fs goes if you wish I will contact them how ever
>these are your scripts not mine so I personally thought I would
>contact you first to see if you wanted these changes posted.
>I also hope that by updating these scripts I have not stepped on
>your tows in any way. after all they are your scripts and I had no
>way of contacting you to request consent before updating them. my
>only defense for this action of updating with out consent is I was
>sick of not being able to use my library. I do hope this
>helps. and if you would like me to contact fs instead of you doing
>it after you give these changes your ok I will do so.
>thanks.
>
>
>
>Jim Grimsby JR.
>Msn: <mailto:jim.grimsby@xxxxxxx>jim.grimsby@xxxxxxx
>e-mail: <mailto:jimgrims@xxxxxxxxxxx>jimgrims@xxxxxxxxxxx
>Skype: jim.grimsby
>-----Original Message-----
>From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On
>Behalf Of David Truong
>Sent: Sunday, June 18, 2006 4:25 PM
>To: jfw@xxxxxxxxxxxxx
>Subject: RE: David the creator of the winamp scripts
>
>Hi Jim,
>
>If you want your updated Winamp scripts to be included with the Jaws
>distribution then contact Freedom Scientific. they handle all
>updates for our Winamp Scripts. I can certainly put your updated
>scripts on our Winamp scripts home page as well. I won't be able to
>do anything for a couple of weeks as I will be in Spartanburg South
>Carolina playing with the Australian team in the upcoming Goalball
>World Championships. But feel free to send them to me.
>
>
>
>David Truong
>
>E-mail and MS messenger: davidtruong@xxxxxxxxxxxxxxx
>
>Skype: blindboxer1967
>
>Home
>Page:
><http://members.optusnet.com.au/davidtruong/>http://members.optusnet.com.au
/davidtruong/
>
>
>
>
>----------
>From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On
>Behalf Of Jim Grimsby JR.
>Sent: Monday, June 19, 2006 7:22 AM
>To: jfw@xxxxxxxxxxxxx
>Subject: David the creator of the winamp scripts
>
>note the below does not mean every one start asking me for the
>updated winamp scripts.
>I have updated the winamp scripts so that the on line services work
>and there is a key to move threw the option in the winamp media
>library. this command is f6 and it works a lot like windows
>help. I have also updated the scripts so focus is not moved away
>from the tree view tell you choose another frame with the f6
>command. also the virtual buffer now works for html controls in the
>library. so you can use the html browsing features of jaws. now
>what I need is where and to whom to send these scripts to so they
>can be used by other jaws users.
>I want to speak to David directly. I do not want to send these
>scripts a thousand times to everyone who might want them. please
>the makers of the winamp scripts contact me with directions.
>
>Jim Grimsby JR.
>Msn: <mailto:jim.grimsby@xxxxxxx>jim.grimsby@xxxxxxx
>e-mail: <mailto:jimgrims@xxxxxxxxxxx>jimgrims@xxxxxxxxxxx
>Skype: jim.grimsby
>
>
>--
>No virus found in this outgoing message.
>Checked by AVG Free Edition.
>Version: 7.1.394 / Virus Database: 268.9.0/368 - Release Date:
>6/16/2006
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.1.394 / Virus Database: 268.9.0/368 - Release Date:
>6/16/2006
>
>
>--
>No virus found in this outgoing message.
>Checked by AVG Free Edition.
>Version: 7.1.394 / Virus Database: 268.9.0/368 - Release Date:
>6/16/2006
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.9.0/368 - Release Date: 6/16/2006
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.9.0/368 - Release Date: 6/16/2006
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
