[jawsscripts] Re: Frame Viewer Issue
- From: Don Mauck <don.mauck@xxxxxxxxxx>
- To: jawsscripts@xxxxxxxxxxxxx
- Date: Thu, 9 Feb 2012 06:33:45 -0800 (PST)
I would also add that if for any reason the screen resolution gets altered it
will hose up any frames that you've created, I too do not like them with the
exception of true emulation screens such as AS400 or 3270 instances.
-----Original Message-----
From: Jackie McBride [mailto:abletec@xxxxxxxxx]
Sent: Thursday, February 09, 2012 7:26 AM
To: jawsscripts@xxxxxxxxxxxxx
Subject: [jawsscripts] Re: Frame Viewer Issue
Tom, have u checked the relevant help file regarding this? It's in the Jaws
help topics under customizing jaws > frame viewer. There's a troubleshooting
section under that. There's a lot of stuff that can go wrong w/frames (I
personally am not a huge fan for a variety of reasons, but, yeah, sometimes
they're good). U say u have the app open, so that's likely not a consideration.
Your next consideration is the validation rules, so you'll need to check the
frames' properties to make sure that the rules are what u need them to be.
Specifically, sometimes these rules contain document titles, for example, which
means they won't work when another document is loaded. You'll also need to
check that the application's settings are in fact enabled in the jaws manage
applications settings dialog.
1 of the reasons I'm not a huge fan of frames is that they're seriously
resolution-dependent; thus, if u created a frame while the app was maximized &
then tried to make it work while the app is in the restored state, it won't.
I've also had situations where I created frames for an ap, & when it was
updated, of course the blippin things didn't work. W/that, I actually ended up
havin to delete 'em & start over.
The reason I asked u to take a long hard look at that help file is simply
because, as u get into the guts of how frames work, it also kind of tips u off
to what could be going haywire.
HTH.
On 2/8/12, Tom R <twr6444@xxxxxxxxx> wrote:
> Hi All,
>
> I am new to Jaws and having a problem with Frame Viewer I can't seem
> to figure out.
> I have successfully created quite a few frames, so I have a pretty
> good handle on the process.
>
> Today I went to a screen that I had created 8 frames on earlier,
> launched Frame Viewer and listed the frames. All 8 frames showed up on
> my list, but non showed on the screen and the "Go to Frame" button was
> greyed out. I am sure this is something simple I am missing.
>
> As always, any help is greatly appreciated.
>
> Tom Reinhardt
> __________�
>
> View the list's information and change your settings at
> //www.freelists.org/list/jawsscripts
>
>
--
Blame the computer--why not? It can't defend itself & occasionally might even
be the culprit Jackie McBride Ask Me Computer Questions at: www.pcinquirer.com
Jaws Scripting training materials: www.screenreaderscripting.com
homePage: www.abletec.serverheaven.net
__________�
View the list's information and change your settings at
//www.freelists.org/list/jawsscripts
__________�
View the list's information and change your settings at
//www.freelists.org/list/jawsscripts
Other related posts:
