[jaws-uk] Re: Problem with Jaws 9 and 10

  • From: "Darren H" <darren@xxxxxxxxxxxx>
  • To: <jaws-uk@xxxxxxxxxxxxx>
  • Date: Thu, 4 Nov 2010 10:31:05 -0000

Hi.
 
Thanks George.
 
Incidentally, I've stopped the found hardware Wizzard for the high def audio
bus from sparking up.
 
I'll check with Site & Sound, Jaws provider.
 
Cheers
Darren

  _____  

From: jaws-uk-bounce@xxxxxxxxxxxxx [mailto:jaws-uk-bounce@xxxxxxxxxxxxx] On
Behalf Of George Bell
Sent: 04 November 2010 10:15
To: jaws-uk@xxxxxxxxxxxxx
Subject: [jaws-uk] Re: Problem with Jaws 9 and 10



Hi Darren,

 

Do you mean "Asus" as opposed to "Isus"?

 

If so, this appears to be a dual monitor card, and I've a sneaky feeling you
may have to disable the second output. 

 

Perhaps worth a call to JAWS technical support to check.

 

George.

 

From: jaws-uk-bounce@xxxxxxxxxxxxx [mailto:jaws-uk-bounce@xxxxxxxxxxxxx] On
Behalf Of Darren H
Sent: 04 November 2010 10:03
To: jaws-uk@xxxxxxxxxxxxx
Subject: [jaws-uk] Re: Problem with Jaws 9 and 10

 

Hi.

 

Sorry, the card is...

 

Isus EN210 Silent

 

I installed yesterday straight from the provided CD.

 

I'll check regarding updated drivers.

 

Also, and this may or may not be connected, at windows start up I'm
receiving a found new hardware for high definition audio bus, even though
the only card installed is working correctly and it's an edoral UA25E

 

Cancelling out of that message doesn't seem to cause any issues.

 

Cheers

Darren

 

 

 

  _____  

From: jaws-uk-bounce@xxxxxxxxxxxxx [mailto:jaws-uk-bounce@xxxxxxxxxxxxx] On
Behalf Of George Bell
Sent: 04 November 2010 09:57
To: jaws-uk@xxxxxxxxxxxxx
Subject: [jaws-uk] Re: Problem with Jaws 9 and 10

Perhaps rather a basic question, but are you sure the correct, up to date
drivers for the video card have been installed?

 

It might also help if we knew what make and model of card you have
installed.

 

George.

 

From: jaws-uk-bounce@xxxxxxxxxxxxx [mailto:jaws-uk-bounce@xxxxxxxxxxxxx] On
Behalf Of Darren H
Sent: 04 November 2010 07:20
To: jaws-uk@xxxxxxxxxxxxx
Subject: [jaws-uk] Problem with Jaws 9 and 10

 

Hi folks.

 

I had a problem with a faulty graphics card which kept causing Jaws to bring
up a message at windows start up.

 

Install video intercept and restart etc.

 

At that time, I got an error saying it couldn't install.

 

The graphics card has now been replaced but am still getting the video
intercept install mesage.

 

However, clicking the execute button does now restart the system.

 

On restart, the same message appears.

 

I'm not able to use the Jaws cursor, presumably because of this problem.

 

All this was with Jaws 9.

 

I installed Jaws 10 to see if that would help, but the same problem occurs.

How can I fix this because the system is totally useless as it is.

Thanks in advance for any assistance.

 

Incidentally, the system has just been repaired and serviced, so it's all
operating fine.

 

Cheers

Darren

Other related posts: