[jaws-uk] Re: Jaws Crashing in large Tables

  • From: <sharon.bowell@xxxxxxxxx>
  • To: <jaws-uk@xxxxxxxxxxxxx>
  • Date: Wed, 4 May 2022 16:44:07 +0100

Hi, and thanks to all for your suggestions.

I will give them a try, and report back.

My tables are in word, so will give some of your suggestions a go.

Thanks.

Sharon  

-----Original Message-----
From: jaws-uk-bounce@xxxxxxxxxxxxx <jaws-uk-bounce@xxxxxxxxxxxxx> On Behalf
Of jovian3@xxxxxxxxx
Sent: 04 May 2022 16:12
To: jaws-uk@xxxxxxxxxxxxx
Subject: [jaws-uk] Re: Jaws Crashing in large Tables

Hi Sharon,

In addition to what others recommended, I have additional recommendations. I
also experience Jaws crashing when using large spreadsheets with lots of
calculations. This was happening with all versions of Jaws so I doubt that
going to earlier Jaws versions would help. When you say tables? Where are
these tables? In MS word or in an web page? I recommend the following in no
particular order:
1. Is your PC short on RAM? Try having 16GB.
2. Assuming the tables are in Word, try upgrading to the latest version of
Office and, 3. Get a 64 bit version of Office. 
I noticed a slight improvement in performance when I installed a 64 bit
version.
Also, when Jaws crashes on my large spreadsheets, I just restart Jaws. I did
not have much luck with substituting Jaws for Narrator or NVDA.
HTH
Jo  

-----Original Message-----
From: jaws-uk-bounce@xxxxxxxxxxxxx <jaws-uk-bounce@xxxxxxxxxxxxx> On Behalf
Of sharon.bowell@xxxxxxxxx
Sent: Wednesday, May 4, 2022 6:53 AM
To: jaws-uk@xxxxxxxxxxxxx
Subject: [jaws-uk] Jaws Crashing in large Tables

Hi,
 

Wonder if someone could advise me.

 

I'm an audio typist, and a lot of my work involves large tables, over 350
rows. 

 

I have recently experienced jaws being very slow to respond when my tables
get over 300 rows, and crashing. I am not sure if it's jaws or word, but
think it's jaws.

 

I'm using jaws 22, latest version, and office 2016.

 

Wonder if anyone could help, as it's frustrating when I have to keep
restarting the pc, type a bit more then start again.

 

I have tried to restart jaws, but it just doesn't seem to respond.

 

Thanks.

 

Sharon 



** To leave the list, click on the immediately-following link:-
** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** jaws-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** jaws-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** jaws-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** jaws-uk-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** jaws-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** jaws-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: