Brian: All works fine up to the point where I choose "Talking to your Computer (Easier Reading: Instructional)." When I press the Grav key while in the next screen, JAWS says: "e would like you to read." Thanks. ----- Original Message ----- From: "Brian Hartgen" <Brian.Hartgen@xxxxxxxxxxxxxxxxxxxxx> To: <j-say@xxxxxxxxxxxxx> Sent: Friday, November 16, 2007 2:15 PM Subject: [j-say list] Re: Setup Problems. Hi Jim Please give examples of what you mean when you say you cannot hear all of the text. Is it the first part of the text which is cut off, or example the first letter or two? This does occur with some video adapters. Thank you. Brian Hartgen Technical Consultant T&T Consultancy Ltd Office suite 5, Imex Technology Park Trentham Lakes South Stoke-On-trent ST48LJ Phone: 08452 303015 Fax: 01782 646142 Web Site, www.tandt-consultancy.com NOTICE: The information contained in this email and any attachments is confidential and may be legally privileged. If you are not the intended recipient you are hereby notified that you must not use, disclose, distribute, copy, print or rely on this e-mail's content. If you are not the intended recipient, please notify the sender immediately and then delete the email and any attachments from your system. T&T Consultancy Ltd have made strenuous efforts to ensure that emails and any attachments generated by its staff are free from viruses. However, it cannot accept any responsibility for any viruses which are transmitted. We therefore recommend you scan all received e-mail messages. Registered in England No. 4098268 -----Original Message----- From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx] On Behalf Of Jim Noseworthy Sent: 16 November 2007 16:50 To: j-say@xxxxxxxxxxxxx Subject: [j-say list] Setup Problems. Hi Folks: With the latest version of J-Say, and the correct JFW build, I am having problems reading the teaching/training text with JAWS using the grav key. Only pieces of the text are being read. Any ideas? Thanks all over the place.