Sue: Thanks for your response. I followed the instructions given in the J-Say installation text. Thanks all over the place. ----- Original Message ----- From: "Martin, Sue W." <Sue.Martin@xxxxxx> To: <j-say@xxxxxxxxxxxxx> Sent: Friday, November 16, 2007 2:04 PM Subject: [j-say list] Re: Setup Problems. Hmm, interesting problem. Any chance your display settings are other than those recommended by JAWS? For example, a different color scheme or different font? Sue W. Martin Management Analyst, 508 Compliance Health Data and Informatics, (HDI) 205.943.2391 -----Original Message----- From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx] On Behalf Of Jim Noseworthy Sent: Friday, November 16, 2007 12:01 PM To: j-say@xxxxxxxxxxxxx Subject: [j-say list] Re: Setup Problems. Ed: I have the below mentioned software packages and their correct versions installed; however, I am not able to get JAWS to read the full text of the teaching/training text during the initial setup of Dragon. Cheers. ----- Original Message ----- From: Ed. Rosenthal <mailto:edward@xxxxxxxxxxxx> To: j-say@xxxxxxxxxxxxx Sent: Friday, November 16, 2007 1:28 PM Subject: [j-say list] Re: Setup Problems. Jim- the current version of J-Say is 5.02, and it supports Jaws for Windows version 8.0 .1177. Let us know if there are other questions. -ed. From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx] On Behalf Of Jim Noseworthy Sent: Friday, November 16, 2007 8:50 AM To: j-say@xxxxxxxxxxxxx Subject: [j-say list] Setup Problems. Hi Folks: With the latest version of J-Say, and the correct JFW build, I am having problems reading the teaching/training text with JAWS using the grav key. Only pieces of the text are being read. Any ideas? Thanks all over the place.