[j-say list] Re: Dragon not accepting commands
- From: "Sue Martin" <sue.martin@xxxxxxxxxxxxxx>
- To: <j-say@xxxxxxxxxxxxx>
- Date: Fri, 17 Feb 2012 03:32:05 -0600
A couple of comments here. First, Ann, you say that your commands are
beeing transcribed into your document. This might seem obvious but, are you
using Dragon Pro or Dragon Premium? Premium does not provide for command
and control by voice. Second, if you want to close a program, try the
command, close program.
Hope that helps.
Sue
beting
-----Original Message-----
From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx] On
Behalf Of Ann Byrne
Sent: Thursday, February 16, 2012 7:22 PM
To: j-say@xxxxxxxxxxxxx
Subject: [j-say list] Re: Dragon not accepting commands
It manages words very nicely. To issue a keystroke command I say 'press'
right? Like "press alt f4"?
At 07:16 PM 2/16/2012, you wrote:
>Is the microphone that you are using for dictation working?
>
>-----Original Message-----
>From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx] On
>Behalf Of Judy Watford
>Sent: Thursday, February 16, 2012 9:36 PM
>To: j-say@xxxxxxxxxxxxx
>Subject: [j-say list] Re: Dragon not accepting commands
>
>I am having the same problem with version 9. I did a j-say repair as
>instructed and it will take some commands and ignore others.
>
>I have used this successfully in the past. I can't figure out what is
>going on. I hope t and t will be able to improve the traing portion. I
>was going to create a new profile, but the j-say key hung up half way
>through the training material. I waited a safe four second interval,
>but this feature has never worked well for me. Will there be an
>improvement or has it stayed the same in dragon 11.5. I am considering
>an upgrade, but I would like to see if the problems have been fixed.
>
>I increased my accuracy setting and didn't get a long speech lag and
>things were a little better.
>Another problem I am now having is when I start to spell something in
>the correction box, it just echos the first letter. Yes, I have echo
>and spell turned on. Sometimes, it will silently finish the word and
>sometimes it doesn't. I find this irritating because I have to use the
keyboard.
>
>Hope someone on list can help with this.
>
>Judy
>
>
>-----Original Message-----
>From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx] On
>Behalf Of Ann Byrne
>Sent: Wednesday, February 15, 2012 8:48 PM
>To: j-say@xxxxxxxxxxxxx
>Subject: [j-say list] Dragon not accepting commands
>
>I'm new to speech input, and assume I have something set wrong somewhere.
>When I dictate, Dragon is happy. When I say 'move down one', Dragon
>types it into my document. When I say "press control n"
>it either ignores me or goes ting. How do I explain that I am
>commanding????
>
>Thanks,
Other related posts:
