[iyonix-support] Re: Printing with old kit
- From: Chris Evans <chris@xxxxxxxxxxxxxxx>
- To: iyonix-support@xxxxxxxxxxxxx
- Date: Wed, 4 Apr 2007 13:29:30 +0100 (BST)
On Fri 30 Mar, Ewen Pring wrote:
>
> In message <18d6a8cb4e.dougjwebb@xxxxxxxxxxxxxxx> sent on 30 Mar
> Doug Webb <doug.j.webb@xxxxxxxxxxxxxx> wrote:
>
> > In message <b7359ccb4e.ewen@xxxxxxxxxxxxxxxxxxxx>
> > Ewen Pring <ewen.pring@xxxxxxxxxxx> wrote:
>
> >> I have followed the instructions about the Castle BJC7000 driver on
> >> their website, resaved it out from PrintEdit, and installed the
> >> driver. The configure section of !Printers has the text printing
> >> options section available (not greyed out) which suggests it will
> >> work.
> >>
> >> Ian can you perhaps confirm if text printing works, before I take the
> >> old printer out of store, as I would need this facility?
> >>
> >> Many thanks
> >>
> > Not greyed out on my version.
>
> Nor mine, as I mentioned. I would like to know if anyone can confirm
> whether text printing actually works.
I can confirm that:
Castles driver does not support plain text printing but that ours driver does!
http://www.cjemicros.co.uk/micros/individual/prodpages/CJE-CNPDR-BJC7000.shtml
Chris Evans
--
CJE Micro's / 4D 'RISC OS Specialists'
Telephone: 01903 523222 Fax: 01903 523679
chris@xxxxxxxxxxxxxxx http://www.cjemicros.co.uk/
78 Brighton Road, Worthing, West Sussex, BN11 2EN
The most beautiful thing anyone can wear, is a smile!
---
To alter your preferences or leave the group,
visit //www.freelists.org/list/iyonix-support
Other info via //www.freelists.org/webpage/iyonix-support
Other related posts:
