[iyonix-support] Re: Pen drive problems after upgrading

  • From: Chris Evans <chris@xxxxxxxxxxxxxxx>
  • To: iyonix-support@xxxxxxxxxxxxx
  • Date: Thu, 22 Mar 2007 11:16:55 +0000 (GMT)

On Wed 21 Mar, Ian Hamilton wrote:
> 
> In article <4ec7024ea8jack@xxxxxxxxxxxxxx>, Jack Evans
> <jack@xxxxxxxxxxxxxx> wrote:
> 
> [Snip] Two pen drives not recognised after 5.13 upgrade
> 
> > Previously all was well but now neither show up on the iconbar even
> > after USBKick or from the front or back USB slots. Also I note that the
> > 'Convential SCSI' area of the Discs configuration window is greyed out.
> 
> > Could this be related to the upgrading?
> 
> Sounds as though you have a boot sequence error. 

Jack have you checked that no internal cables were disturbed when fitting
the graphics card?

You could check with !USBInfo that the pen is being seen!
 
> Unless the SCSI modules have changed in 5.12/5.13 they are loaded from
> Predesk. The shaded 'Conventional SCSI' suggests they haven't loaded. I
> suspect these devices are recognised (*USBDevices) but the lack of SCSI
> modules means they don't show as discs. 



Chris Evans

-- 
CJE Micro's / 4D                'RISC OS Specialists'
Telephone: 01903 523222             Fax: 01903 523679
chris@xxxxxxxxxxxxxxx     http://www.cjemicros.co.uk/
78 Brighton Road, Worthing, West Sussex,     BN11 2EN
The most beautiful thing anyone can wear, is a smile!


---
To alter your preferences or leave the group, 
visit //www.freelists.org/list/iyonix-support
Other info via //www.freelists.org/webpage/iyonix-support

Other related posts: