On Sun 13 Jan, John Williams wrote: > > In article <478A3C28.1000108@xxxxxxxxxxxxxxxx>, > Allan Dawes <allan.dawes@xxxxxxxxxxxxxxxx> wrote: > > > Oh, this is annoying. I've chosen an unsupported res, and now lost the > > display. > > Does anyone know the screen mode for 1280x1024 so that I can recover > > from the command line? > > Press F12 and type WimpMode 28. That should get you back to 640 by 480. I use *wimpmode 31 that gives 800 x 600 (The star command like almost all is not case sensitive) IIRC I have had monitors that didn't like 640x480 > If you haven't supported the lower modes in the MDF, Shift restart and > learn a lesson. But if you've set it in configure it will still not display in which case you need to hand edit: !Boot.Choices.Boot.PreDesk.Configure.VRAM To say: WimpMode X800 Y600 C256 Please note that the first line which looks be something like: LoadModeFile BootResources:Configure.Monitors.Acorn.AKF60 will if a power on delete has been done say |oadModeFile BootResources:Configure.Monitors.Acorn.AKF60 If they look the same to you, look very carefully at the first character one is an "L" and the other a "|" (not a lower case L) Chris Evans -- CJE Micro's / 4D 'RISC OS Specialists' Telephone: 01903 523222 Fax: 01903 523679 chris@xxxxxxxxxxxxxxx http://www.cjemicros.co.uk/ 78 Brighton Road, Worthing, West Sussex, BN11 2EN The most beautiful thing anyone can wear, is a smile! --- To alter your preferences or leave the group, visit //www.freelists.org/list/iyonix-support Other info via //www.freelists.org/webpage/iyonix-support