[iyonix-support] Re: No screen on Boot-up

  • From: "David J. Ruck" <druck@xxxxxxxxxxxx>
  • To: iyonix-support@xxxxxxxxxxxxx
  • Date: Sun, 18 Mar 2007 18:50:19 GMT

On 17 Mar 2007 Graham Jenkins <graham@xxxxxxxxxxxxxx> wrote:
> My MDF for my Visionseven 17" LCD is as follows:

[snip]

If using an LCD, don't drive it higher than 60Hz. It doesn't flicker like a
CRT, so all using a higher refresh does is make life more difficult for the
analogue electronics on the graphics card and monitor. The lower bandwith of
60Hz will give a sharper image and will be less prone to ghosting. Comment
out any definitions in your MDF higher than 60Hz, so you don't have to keep
using the frame rate box in the mode selector.

Cheers
---Dave

-- 
____________________________________________________________________________

  David J. Ruck    Phone: +44- (0)7974 108301    Email: druck@xxxxxxxxxxxx
____________________________________________________________________________
---
To alter your preferences or leave the group, 
visit //www.freelists.org/list/iyonix-support
Other info via //www.freelists.org/webpage/iyonix-support

Other related posts: