[iyonix-support] Re: Iyonix network card failure
- From: Richard Partridge <rkp@xxxxxxxxx>
- To: iyonix-support@xxxxxxxxxxxxx
- Date: Tue, 24 Oct 2006 23:29:40 +0100
In article <2454033.15472910-taffy@xxxxxxxxxxxxxxxxx>, Elwyn Evans
<taffy@xxxxxxxxxxxxxxxxx> wrote:
> Hi All,
> This is the first time I have needed Iyonix support so thank heaven
> I chose to receive it on my trusty RiscPc.
> For a few days the Iyonix would not connect to my network/Broadband
> router (Netgear DG834) on bootup but would after a reset. .......
> So to the nub! Is the Iyonix network card replaceable or is this a
> return to Castle Job?
Dear Elwyn,
Have I got in first? There may well be a chorus of people saying
"check the power supply". Failure of the Ethernet card seems to be
the first symptom of a dodgy power supply - it certainly was for me.
Though nobody seems to know quite why, the 5v rail should measure
5.04v (if I remember) on a digital meter.
Regards,
Richard Partridge.
--
Richard Partridge
rkp@xxxxxxxxx
---
To alter your preferences or leave the group,
visit //www.freelists.org/list/iyonix-support
Other info via //www.freelists.org/webpage/iyonix-support
Other related posts:
