On Sun 17 Jun, Chris N.L. France. (hp) wrote: > I have been having trouble for a while transferring backups to the NSD, > and when I lost internet access I blamed BT, switched off and tried later. > However, it's not BT. > I now know that, usually, when I boot-up the Iyo it connects to the router > and thus the net and NSD. It is now apparent that the culprit is the Iyo > itself because I've re-jigged my cables and moved the router so I can > see it and the little green led on the router, now associated only with > the Iyo, blinks out after around 30 mins and remains so. > (As I say, if I leave it 'off' for a while, sometimes when I try again > it re-connects.) > If I use a different port the behaviour is the same. If I now ping the > router or the Iyo I get, 'Host is down'. If I try to connect to the NSD > I get 'No buffer space available'. > > (It's as if it's a heat-related problem?) > > Is there anything I can do? > > BW > Chris F I have a D-Link DNS-313 NAS-disc and running !Lanman 2.05 (sept. 2010) bought by CJE. It runs well as long as there is datatransfer. However after a long time 1) no data-transfer then the NAS goes idle and the connection via my switch goes down. Trying to re-connect -> most times: No go. I expect (but are not sure) the modem/router distributes new IP-adresses time by time. 1) how long a long time is; I don't know. Still RISCOS 5.08 and networked RiscPC's, Iyonix, A9Home, NAS-disc and laserprinter via switch. The switch is connected to the modem/router. regards Charles Deckers -- --- To alter your preferences or leave the group, visit //www.freelists.org/list/iyonix-support Other info via //www.freelists.org/webpage/iyonix-support List-related queries to iyonix-support-moderators@xxxxxxxxxxxxx