[iyonix-support] Re: Dead Iyo

  • From: JV <groups@xxxxxxxxxxxxxxxxxxx>
  • To: iyonix-support@xxxxxxxxxxxxx
  • Date: Sun, 19 Jul 2009 12:39:03 +0100

In message <ee86cd7a50.JV@xxxxxxxxxxxxxxxxxxxxxxxxxx>
          JV <groups@xxxxxxxxxxxxxxxxxxx> wrote:

> In message <4A5A300A.6070206@xxxxxxxxxx>
>           John Ballance <jwb@xxxxxxxxxx> wrote:

>> JV wrote:
>>> In message <4A59107E.7090902@xxxxxxxxxx>
>>>           John Ballance <jwb@xxxxxxxxxx> wrote:

>> IF it IS red to black, this should be 5.06v .. IF you trust your
>> voltmater, then it could suggest the powersupply has failed, and IF it
>> really is putting 10v on the 5v rail, you WILL have fried the motherboard.

> Not 10v. This was a mistake on my part but 5.09v - 5.10v (a senior
> moment).

>> So.. first.. do something to verify the behaviour of your testgear ..
>> e.g. a torch battery .. typically 1.2 to 1.3v for an alkaline battery ..

> Checked power supply again with another multimeter (this one gets
> re-configure on a monthly basis) and the reading is 5.11volts.

>> If you have e.g. a peecee as well.. you might like to try red to black
>> on a power connector in that..

>> JB

> I will obtain a replacement power supply unit and report back if this
> cures the problem or not.

Getting same problem with new power supply fitted.

Looks like this Iyonix is dead if no one can suggest anything else I 
could try.

To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: