In article <e26f026b4f.JCCArc@xxxxxxxxxxxxxxx>, J C Conner <jcc@xxxxxxxxxxxxxxxxx> wrote: > In message <4f6ae25533Ian_Hamilton@xxxxxxxxxxxxxxxx> Ian Hamilton > <Ian_Hamilton@xxxxxxxxxxxxxxxx> wrote: > > In article <a487e06a4f.JCCArc@xxxxxxxxxxxxxxx>, J C Conner > > <jcc@xxxxxxxxxxxxxxxxx> wrote: > >> Problem : the SCSI 0 and 1 icons don't always appear on the icon bar. > > > > Does the card reader show as a USB device? (*USBDevices) > > > Not if the icons are not there. > > If not then try !USBKick. If this doesn't fix it then try moving your > > other USB devices to different slots (e.g. to the adjacent slot to > > where they are now), this will change the timings during boot. > !USBKick does nothing here (used to work fine when I had a > USB/Parallel Converter to Printer attached!). > > > Currently only have keyboard and mouse (original PS2 mouse with > converter) into one USB slot. Moving them causes them to fail. [Snip] It may be possible to amend !USBKick to fix the problem. If you are interested in running some debug code then email me. Let me know which version of !USBKick you are running and if any of the configuration options are unticked. Ian -- Ian Hamilton (RISC PC RO4) http://www.hamiltoni.pwp.blueyonder.co.uk/ (Iyonix RO5) Programs compatible with RISC OS 3/4/5 --- To alter your preferences or leave the group, visit //www.freelists.org/list/iyonix-support Other info via //www.freelists.org/webpage/iyonix-support