In message <c30ee95851.D_Lane@xxxxxxxxxxxxxxxxxxxx> on 19 Sep 2010 David R Lane <D_Lane@xxxxxxxxxxxxxxxxxxxx> wrote: > Hi comrades in ARMs, > Recently, Nixiyo, my Iyonix PC, has shown a black screen after > booting. Following previous advice, I stuck an obey file with > instructions > *pcidevices { > $.pcid } > *settype $.pcid text [snip] > To start with, this produced the desktop. But the problem seems > to be getting worse as I often have to do this over and over > again before getting the desktop to appear. Each time I repeat > the procedure, a faint flash of "Input not supported" and then > a faint flash of the desktop appears, the flashes gradually > getting brighter after each attempt until the desktop appears > permanently. > Once, as an experiment, I booted Nixiyo, got the black screen, > but left it like that for about 20 minutes and then did a > reinit NVidia and got the desktop first go. > The problem seems to have got worse as the days have got > colder in the last week or so. Initially, I did see the text > output on the screen, but just didn't get the desktop. Now I > don't see anything. It's OK if I restart Nixiyo soon after > switching off. > Is the NVidia card on the way out or what? I would investigate the PSU first - your recent symptoms are similar to ones I occasionally get. Replacing my PSU decreased the incidence of them. Regards Andrew -- Andrew Pinder --- To alter your preferences or leave the group, visit //www.freelists.org/list/iyonix-support Other info via //www.freelists.org/webpage/iyonix-support