Re: w32tm

  • From: "Adam Embrey" <aembrey@xxxxxxxxxxx>
  • To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
  • Date: Wed, 15 Aug 2001 09:18:27 -0500

sorry missed a post

-----Original Message-----
From: Adam Embrey 
Sent: Wednesday, August 15, 2001 9:11 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: w32tm


http://www.ISAserver.org



what makes you think there are 5 nics?

-----Original Message-----
From: Jim Harrison [mailto:jim@xxxxxxxxxxxx]
Sent: Wednesday, August 15, 2001 1:14 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: w32tm


http://www.ISAserver.org


"W32Time: Server: Binding to 5 NICs."

You have 5 NICs installed in your AD?

This is not an ideal scenario, to say the least.  Your routing table
must be
really interesting.  Can you provide some details of this machine and
the
network?

----- Original Message -----
From: "Greg Foulks" <greg.foulks@xxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Sent: Tuesday, August 14, 2001 1:46 PM
Subject: [isalist] Re: w32tm


> http://www.ISAserver.org
>
>
> When I try the w32tm -v -once I get the following output. Does this
look
> right?
>
> W32Time: BEGIN:InitAdjIncr
> W32Time:    Adj 156254 , Incr 156250  fAdjust 0
> W32Time:    156254 Adj!=Incr 156250
> W32Time: END:Line 2473
> W32Time: BEGIN:TsUpTheThread
> W32Time: END  Line 1384
> W32Time: TimeMMInit()
> W32Time: Kernel timer : using default maximum resolution
> W32Time:                MaximumTime = 156250
> W32Time:                CurrentTime = 156250
> W32Time: Timer calibrated, looped 1 times
> W32Time: BEGIN:InitTmCfg
> W32Time: END:Line 752
> W32Time: BEGIN:InitTmCli
> W32Time: END:Line 2566
> W32Time: BEGIN:InitTmData
> W32Time: END:Line 2588
> W32Time: AvoidTimeSyncOnWan 0
> W32Time: Using sticky Adj 156254
> W32Time: ntpserver - tock.usno.navy.mil
> W32Time: BEGIN:CMOSSynchSet
> W32Time:    Setting adjustment 156254 - Bool  0
> W32Time:    BEGIN:SetTSTimeRes
> W32Time:    END:Line 1272
> W32Time: END:Line 841
> W32Time: BEGIN:InitializeDC
> W32Time:    BEGIN:GetRole
> W32Time:       Role is 'PDC'
> W32Time:    END  Line 670
> W32Time:    BEGIN:FetchParentDomainName
> W32Time:       NetLogonGetTimeServiceParentDomain() returned 54b with
ptr
0
> W32Time:    END:Line 780
> W32Time: END:Line 702
> W32Time: Server: Binding to 5 NICs.
> W32Time: Advertising that I'm a Time Service Provider
> W32Time: timeBeginPeriod: setting resolution 9
> W32Time: BEGIN:TimeSync
> W32Time:    BEGIN:FGetType
> W32Time:    END  Line 252
> W32Time:    BEGIN:FDoTimeNTPType
> W32Time:       BEGIN:ChooseNTPServer
> W32Time:       END  Line 2150
> W32Time:       BEGIN:GetSocketForSynch
> W32Time:          NTP: ntpptrs[0] - TOCK.USNO.NAVY.MIL
> W32Time:          rgbNTPServer TOCK.USNO.NAVY.MIL
> W32Time:          Port Pinging to - 123
> W32Time:          Connecting to "TOCK.USNO.NAVY.MIL" (192.5.41.41)
> W32Time:       END:Line 1147
> W32Time:       BEGIN:GetDefaultRid
> W32Time:       END  Line 2329
> W32Time:       BEGIN:ComputeDelay
> W32Time:          BEGIN:NTPTry -- init
> W32Time:          END  Line 1660
> W32Time:          BEGIN:NTPTry -- try
> W32Time:             BEGIN:ComputeInterval
> W32Time:             END  Line 2449
> W32Time:             Sending to server  48 bytes...
> W32Time:             BEGIN:TsUpTheThread
> W32Time:             END  Line 1384
> W32Time:             NTP(S): waiting for datagram...
> W32Time:             BEGIN:TsUpTheThread
> W32Time:             END  Line 1384
> W32Time:             NTP(S): waiting for datagram...
> W32Time:             BEGIN:TsUpTheThread
> W32Time:             END  Line 1384
> W32Time:             NTP(S): waiting for datagram...
> W32Time:             BEGIN:TsUpTheThread
> W32Time:             END  Line 1384
> W32Time:             NTP(S): waiting for datagram...
> W32Time:             BEGIN:TsUpTheThread
> W32Time:             END  Line 1384
> W32Time:             NTP(S): waiting for datagram...
> W32Time:             NTP: didn't receive datagram
> W32Time:          END  Line 1923
> W32Time:          Time source failed to produce usable timestamp.
> W32Time:          BEGIN:NTPTry -- fail
> W32Time:          END  Line 1660
> W32Time:          Time Out occured in sockets
> W32Time:          BEGIN:NTPTry -- try
> W32Time:             BEGIN:ComputeInterval
> W32Time:             END  Line 2449
> W32Time:             Sending to server  48 bytes...
> W32Time:             NTP: didn't receive datagram
> W32Time:          END  Line 1923
> W32Time:          Time source failed to produce usable timestamp.
> W32Time:          BEGIN:NTPTry -- fail
> W32Time:          END  Line 1660
> W32Time:          Time Out occured in sockets
> W32Time:          BEGIN:NTPTry -- try
> W32Time:             BEGIN:ComputeInterval
> W32Time:             END  Line 2449
> W32Time:             Sending to server  48 bytes...
> W32Time:             NTP: didn't receive datagram
> W32Time:          END  Line 1921
> W32Time:          Time source failed to produce usable timestamp.
> W32Time:          BEGIN:NTPTry -- fail
> W32Time:          END  Line 1660
> W32Time:       END  Line 1473
> W32Time:    END  Line 366
> W32Time:    BEGIN:ComputePostTimeData
> W32Time:       BEGIN:ComputeInterval
> W32Time:       END  Line 2449
> W32Time:       BEGIN:ComputeSleepStuff
> W32Time:          Computed stagger is 0ms, bias is 0ms
> W32Time:          Time until next sync - 2699.960s
> W32Time:       END:Line 793
> W32Time:    END:Line 219
> W32Time: END:Line 194
> W32Time: BEGIN:TermTime
> W32Time:    NTP(S): received shutdown notification.
> W32Time:    NTP(S): received shutdown notification.
> W32Time:    NTP(S): received shutdown notification.
> W32Time:    NTP(S): received shutdown notification.
> W32Time:    NTP(S): received shutdown notification.
> W32Time:    TimeMMCleanup()
> W32Time:    BEGIN:FinishCleanup
> W32Time:       BEGIN:TsUpTheThread
> W32Time:       END  Line 1384
> W32Time:       Inform NetLogon That you are not a TS Provider
> W32Time:       BEGIN:UnInitializeDC
> W32Time:          Ptrs 0 - 0
> W32Time:       END:Line 725
> W32Time:       Time service stopped.
> W32Time:    END:Line 383
>
> Greg Foulks, MCP
> NewFound Technologies, Inc.
> http://www.nfti.com
> Email: greg.foulks@xxxxxxxx
> Voice: 614.318.5036
> Fax: 614.318.5005
>
>
> -----Original Message-----
> From: Jim Harrison [mailto:jim@xxxxxxxxxxxx]
> Sent: Tuesday, August 14, 2001 4:34 PM
> To: [ISAserver.org Discussion List]
> Subject: [isalist] Re: w32tm
>
>
> http://www.ISAserver.org
>
>
> 1. Make sure your AD is a secureNAT client
> 2. Create a protocol rule allowing NTP (UDP)
> 3. At the AD, open  command window and type:
>     "net time /setsntp:<time_server>"
>     "net stop w32time"
>     "w32tm -v -once"
> (this should be successful.  If not, recheck 1. and 2.)
>     "net start w32time"
> 4. Enjoy your new time sync.
>
> Jim Harrison
> MCP(2K), A+, Network+, PCG
>
> ----- Original Message -----
> From: "Adam Embrey" <aembrey@xxxxxxxxxxx>
> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
> Sent: Tuesday, August 14, 2001 12:45 PM
> Subject: [isalist] w32tm
>
>
> http://www.ISAserver.org
>
>
> Hi
>
> Has anyone had any troubles with windows time service? I cannot get my
> w2k domain controller or another machine to synchronize time with an
> external time source. This has got my authentication all out of wack.
>
> Thanks for any help.
>
> Adam Embrey
>
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
> jim@xxxxxxxxxxxx
> To unsubscribe send a blank email to
$subst('Email.Unsub')
>
>
>
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
> greg.foulks@xxxxxxxx
> To unsubscribe send a blank email to
$subst('Email.Unsub')
>
>
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
> To unsubscribe send a blank email to
$subst('Email.Unsub')
>


------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
aembrey@xxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')

------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
aembrey@xxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')


Other related posts: