Hi Farshad, on the properties of the VPN client -> Networking Configuration -> TCP/IP Advanced Settings there is a check box 'Use Default Gateway on Remote Network'. When it is checked, the metric of the real default gateway (your ISP) is changed to 2 and a new default gateway pointing to your tunnel interface is created with metric 1. When it is unchecked, the real default gateway is left unchanged but a route is added with the classfull network ID of your tunnelinterface pointing to your tunnelinterface. By the way --- very good info about MS implementation is available at http://www.microsoft.com/windows2000/technologies/communications/vpn/default .asp . Hope this helps, Stefaan ----- Original Message ----- From: "farshad farooji" <farshad@xxxxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Tuesday, January 22, 2002 10:58 PM Subject: [isalist] RE: vpn client http://www.ISAserver.org Hi Jay; thanks very much for the help, I think everything is working just fine now, but still when I do a ipconfig/all I don't get the default gateway's IP (that is supposed to be the ISA's internal interface IP). Farshad -----Original Message----- From: Farshad Farooji [mailto:farshad@xxxxxxxxxxxxxx] Sent: Monday, January 21, 2002 1:40 PM To: [ISAserver.org Discussion List] Subject: [isalist] vpn client http://www.ISAserver.org Hi everyone; whenever my vpn client connects to our LAN, he gets a local IP and the correct DNS IP, but the subnet mask is 255.255.255.255 !! and the default gateway given is the same as the IP address assigned to the client. I even created dhcp relay agent in the RRAS and created an interface which is the internal interface of the ISA server. but the same thing happens again. Could anyone help me with this set up which would give me the right netmask and right dhcp options? thanks, Farshad ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: farshad@xxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: stefaan.pouseele@xxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')