Hi Chris, Check out #19. Since you want outbound relay for your remote users, you need to create a secure link, and require authentication. http://www.tacteam.net/isaserverorg/exchangekit/default.htm HTH, Tom Thomas W Shinder www.isaserver.org/shinder ISA Server and Beyond: http://tinyurl.com/1jq1 Configuring ISA Server: http://tinyurl.com/1llp -----Original Message----- From: Chris rollison [mailto:crollison@xxxxxxxxxxxxxxxxxxx] Sent: Monday, September 08, 2003 9:47 PM To: [ISAserver.org Discussion List] Subject: [isalist] smpt relaying http://www.ISAserver.org May or may not be on topic. I have ISA setup on a machine and am wanting to do spam filtering on the same machine. I had everything working fine, expect I could not send outgoing mail through the mail server from outside the firewall. My mail server is published through ISA but had the settings correct for the filtering. Everything would work, but not the outgoing mail from outside. I assume that it has something to do with relay settings, but I have tried about everything that I can, but can't get this setting correct. If I try to send the e-mail through it hangs in the smpt server and says that it can't locate the remote server. Any help would be appreciated. Thanks ------------------------------------------------------ List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ ------------------------------------------------------ Other Internet Software Marketing Sites: Leading Network Software Directory: http://www.serverfiles.com No.1 Exchange Server Resource Site: http://www.msexchange.org Windows Security Resource Site: http://www.windowsecurity.com/ Network Security Library: http://www.secinf.net/ Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: tshinder@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')