Hi Jay, Change the line to: LocalBindTcpPort=1024-65535 HTH, Tom Thomas W Shinder, M.D., MCSE, MCT -----Original Message----- From: Jay J. Mobley [mailto:jmobley@xxxxxxxxxx] Sent: Tuesday, August 28, 2001 12:04 AM To: [ISAserver.org Discussion List] Subject: [isalist] RE: mspclnt.ini not having any effect http://www.ISAserver.org are you speaking of the mspclnt.ini file? on the client or server? if so I have. the line [spoolsv] LocalBindTcpPort=721-731 RemoteBindTcpPort=515 Disable=0 that came from the server, which I did have to edit via the Firewall Client component of the ISA MMC -----Original Message----- From: Thomas W. Shinder [mailto:tshinder@xxxxxxxxxxxxxxxxxx] Sent: Monday, August 27, 2001 10:01 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: mspclnt.ini not having any effect http://www.ISAserver.org Hi Jay, It could be a problem with the MS implementation of the RFC, which isn't exact. I believe they use 1024-65535 for the source port for TCP/IP printing. Try changing the setting to that range on the .ini file. HTH, Tom www.isaserver.org/shinder Thomas W Shinder, M.D., MCSE, MCT -----Original Message----- From: Jay J. Mobley [mailto:jmobley@xxxxxxxxxx] Sent: Monday, August 27, 2001 11:53 PM To: [ISAserver.org Discussion List] Subject: [isalist] mspclnt.ini not having any effect http://www.ISAserver.org Hello List, I am having much trouble (Tom, I was wrong.. It didnt work) I am trying to get LPR to print to a remote print server from an internal firewall client. LPR requires that the call be made from tcp port 721-731. The firewall client is supposed to be able to BindLocalTcpPort=721-731 which it in fact does on the client in question. but a TCPDUMP on the remote print server reveals that in fact the request did not come from the specified ports. The firewall logs show that the request is being sent to the correct port (515) but I cant get that firewall client to behave as its supposed to .. Please , any suggestions or experience would be welcomed. -Jay ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: tshinder@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jmobley@xxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: tshinder@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')