You can either set all nat properties to point to the isa server or turn nat off. -----Original Message----- From: Stefano [mailto:peste@xxxxxxxxxxxx] Sent: 11 February 2002 20:59 To: [ISAserver.org Discussion List] Subject: [isalist] RE: [isalist]ADSL and ISA general question http://www.ISAserver.org I still have to configure it! From the manual it supports SUA(Single User Access)/NAT. How should I set it? Is there any doc on NAT in learning zone (something that explain the problem, that I think is quite typical, generally)? Stefano ----- Original Message ----- From: "pchurchward" <pchurchward@xxxxxxxxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Monday, February 11, 2002 9:29 PM Subject: [isalist] RE: [isalist]ADSL and ISA general question http://www.ISAserver.org Is your Router using NAT? -----Original Message----- From: Stefano [mailto:peste@xxxxxxxxxxxx] Sent: 11 February 2002 17:25 To: [ISAserver.org Discussion List] Subject: [isalist] [isalist]ADSL and ISA general question http://www.ISAserver.org Hello to the List, I've recently bought a ZyXel Router and subscribed an ADSL contract with an Italian ISP. They assigned me a static ip (so I have just one ip). Now I would like to configure some public services (like OWA, a web site, etc..) . My problem is: how can I configure the Router to send all traffic to ISA and what must be the isa internal/external network card configuration? I think that the final Configuratiun should be something like: WWW Server (internal ip)-----------------------(internal ip)ISA SERVER(?ip?)---------(?ip?)ROUTER(external Ip) EXCHANGE Server(external ip)-----| Once this is set fine, I can publish the services (I've seen the tutorials) via MMC isn't it? I hope the question is not too much newbie! Stefano Peduzzi Visible Srl You are currently subscribed to this ISAserver.org Discussion List as: peste@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') > ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: pchurchward@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: peste@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: pchurchward@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')