The ISA default gateway must always be in the external interface and must point to the nearest router in the link to the Internet. If the Sonic firewall really is a firewall, then it also thinks of itself as a router and will act accordingly. Jim Harrison MCP(NT4/2K), A+, Network+, PCG ----- Original Message ----- From: "Jay" <jschwarzkopf@xxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Sunday, October 21, 2001 7:03 AM Subject: [isalist] Re: isa server behind sonic firewall http://www.ISAserver.org No need to set ISA default routing rule. ----- Original Message ----- From: "Jim Harrison" <jim@xxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Saturday, October 20, 2001 4:54 PM Subject: [isalist] Re: isa server behind sonic firewall > http://www.ISAserver.org > > > Put the ISA external interface in that subnet and make the Sonic I the ISA > default gateway in the external NIC. > Set ISA default routing rule to chain to the Sonic. > > Jim Harrison > MCP(NT4/2K), A+, Network+, PCG > > ----- Original Message ----- > From: "James McKelvie" <james.mckelvie@xxxxxxxxxxxxx> > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> > Sent: Saturday, October 20, 2001 10:59 AM > Subject: [isalist] isa server behind sonic firewall > > > http://www.ISAserver.org > > > how do I make isa server work behind sonic firewall - sonic firewall has > an ip of 172.17.1.10 > > thanks > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > jim@xxxxxxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') > > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: jschwarzkopf@xxxxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jim@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')