RE: how to setup isa gatekeeper to route the call

  • From: "Thomas W Shinder" <tshinder@xxxxxxxxxxxxxxxxxx>
  • To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
  • Date: Sat, 6 Sep 2003 23:19:33 -0500

Hi Muzaffar,

Net2phone doesn't use H.323. I don't know what the exact protocols are,
but I believe it requires secondary connections. You can make it work if
you install the firewall client and create an "all IP traffic" rule, but
that's not too secure :-)

You can harass the net2phone devs and ask them what the primary and
secondary connections are.

HTH<
Tom

Thomas W Shinder
www.isaserver.org/shinder 
ISA Server and Beyond: http://tinyurl.com/1jq1
Configuring ISA Server: http://tinyurl.com/1llp

 


-----Original Message-----
From: Muzaffar Khan [mailto:rizkhan151@xxxxxxxxxxx] 
Sent: Saturday, September 06, 2003 10:36 PM
To: [ISAserver.org Discussion List]
Subject: [isalist] how to setup isa gatekeeper to route the call


http://www.ISAserver.org


hello all,
Can anyone Please tell me that how to setup H.323 in ISA server to call
from  a third party software like Net2phone.

My internal network client want to make call internationally through
net2phone.

thanks in advance

Muzaffar khan

------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Other Internet Software Marketing Sites:
Leading Network Software Directory: http://www.serverfiles.com
No.1 Exchange Server Resource Site: http://www.msexchange.org
Windows Security Resource Site: http://www.windowsecurity.com/
Network Security Library: http://www.secinf.net/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
tshinder@xxxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')


Other related posts: