Re: eth ip change
- From: "Jim Harrison" <jim@xxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Tue, 8 Jan 2002 07:02:31 -0800
Since the NIC is disabled, you've effectively "unplugged" it.
You don't get any "safer" without actually pulling the cord.
Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/authors/harrison/
Read the books!
----- Original Message -----
From: "Yoes K" <yoes_isaserver@xxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Sent: Tuesday, January 08, 2002 06:41
Subject: [isalist] eth ip change
http://www.ISAserver.org
i wanna change my outbound ip address ethernet without
restart my isa server by doing this :
1.open outbound network card propeerties.
2.click disable
3.open TCP/IP properties
4.change ip address
5.ok
6.click enable
7.ok
Q: is it safe/secure by doing this things ;)
__________________________________________________
Do You Yahoo!?
Send FREE video emails in Yahoo! Mail!
http://promo.yahoo.com/videomail/
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
