Hi, Tom & John T.: That's why I ask, I can't find any hints either on your books or on microsoft website. I can't do fully testing since the outsourced Exchange is not under my control. I am using Outlook 2002(Outlook XP) with SP2, no Outlook 2000 SP2. I don't know much difference between them. I agree with you and John T. But this decision was made by the finacial manager. I've told them if ISA would open all the ports above 1024, why need firewall? I did lots of testing(even wide open ISA), but no luck to make the MAPI works through the two ISAs belong to different company(that's why VPN is out of consideration). It's nuts because Exchange is not designed to use that way and I bet 99% user will not use Exchage like that. Sigh, in this bad economy, the next I would conside is my job security. :( BTW, the provider is: www.apptix.com. I will continue to do the testing accordingl to the registry tricks of Q articles provided by you guys and update this once I found something. Thanks for all the information given, that's really help! Best regards, John Huang System Administrator -----Original Message----- From: Thomas W Shinder [mailto:tshinder@xxxxxxxxxxxxxxxxxx] Sent: Thursday, March 06, 2003 8:20 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: client behind ISA access to remote Exchange behind another ISA using MAPI http://www.ISAserver.org Hi John, Hmmm. I didn't think about this Exchange Server being off site. I thought that he was saying the Exchange Server was on site and that they were trying to use Exchange RPC publishing rules, but Outlook 2000 SP2 broke the Exchange RPC publishing rule. Its an interesting question and one I haven't researched -- whether Feature Pack 1 will allow Outlook 2000 SP2 clients to access external Exchange servers with no problems. Thanks! Tom Thomas W Shinder www.isaserver.org/shinder ISA Server and Beyond: http://tinyurl.com/1jq1 Configuring ISA Server: http://tinyurl.com/1llp -----Original Message----- From: John Tolmachoff [mailto:isalist@xxxxxxxxxxxx] Sent: Wednesday, March 05, 2003 6:50 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: client behind ISA access to remote Exchange behind another ISA using MAPI http://www.ISAserver.org This is interesting. See my reply to 307926. In your case, is a site to site VPN possible? (It would have to be strictly regulated.) In my opinion, Exchange was never designed nor will it function properly to serve as a mail server for non-local domains. It is the Lexus of corporate e-mail servers. The key word is corporate. If you have to have Exchange and you have to outsource, I would seriously consider a on-site outsourced Exchange server, where it is in your office but is entirely taken care of by someone else. I have never heard of Exchange being used for a corporation where the Exchange server was not within that company. John Tolmachoff MCSE, CSSA IT Manager, Network Engineer RelianceSoft, Inc. Fullerton, CA 92835 www.reliancesoft.com > -----Original Message----- > From: John Huang [mailto:jun@xxxxxxxxxxxxx] > Sent: Wednesday, March 05, 2003 1:17 PM > To: [ISAserver.org Discussion List] > Subject: [isalist] client behind ISA access to remote Exchange behind another ISA > using MAPI > > http://www.ISAserver.org > > > Hi, Dr. Shinder: > > Our LAN is behind a integrated mode ISA. We are using SNAT client for LAN. > Now we want to use outsourced Exchange, which also secured published > behind ISA array. I am using Outlook 2002 SP-2 client, try to connect > using MAPI to the remote Exchange but failed. Someone told me installing > the lastest Feature Pack 1 but still not working. I tested by allowing my > ISA wide open to all to try to connect the remote Exchange, still failed. > Errow message said can not find the server and the mailbox name. Using > sniffer to analyze the packet find that local Outlook client send some > request call but not get reply by the remote Exchange but ISA, while if > not SNAT in DMZ the client can get the reply and establish MAPI > connection. > > After dig out some knowledge base, I found these info: > http://support.microsoft.com/default.aspx?scid=3Dkb;en-us;307926 > http://support.microsoft.com/default.aspx?scid=kb;EN-US;263293 > http://support.microsoft.com/default.aspx?scid=kb;en-us;154596 > > Is this mean that we can not use this kind of sevice or setup because of > the RPC, NAT and Outlook GC? Any suggestion? or the beta 2 version of ISA > will address this problem? > > Thank you very much for your advice. > > > Best regards, > John Huang > System Administrator > > > ------------------------------------------------------ > List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist > ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp > ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ > ------------------------------------------------------ > Exchange Server Resource Site: http://www.msexchange.org/ Windows > Security Resource Site: http://www.windowsecurity.com/ Windows 2000/NT > Fax Solutions: http://www.ntfaxfaq.com > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > isalist@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ ------------------------------------------------------ Exchange Server Resource Site: http://www.msexchange.org/ Windows Security Resource Site: http://www.windowsecurity.com/ Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: tshinder@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ ------------------------------------------------------ Exchange Server Resource Site: http://www.msexchange.org/ Windows Security Resource Site: http://www.windowsecurity.com/ Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jun@xxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')