Hey guys, I have an article in the ISAServer.org archives that covers some of the details of bandwidth rules that might be of help. HTH, Tom -----Original Message----- From: Arwin Catalan [mailto:arwc@xxxxxxxxxxx] Sent: Friday, December 06, 2002 3:10 AM To: [ISAserver.org Discussion List] Subject: [isalist] Re: bandwidth shaping http://www.ISAserver.org No, you cannot assign specific bandwidth. You can only give priorities. The calculation will depend on the number of priorities you have. Ex. If you have bp1 & bp2 bp1 = (bp1/(bp1+bp2))actual bandwidth likewise bp2 will have the same calcalution regards, Arwin ------------------------------------------------------ List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ ------------------------------------------------------ Exchange Server Resource Site: http://www.msexchange.org/ Windows Security Resource Site: http://www.windowsecurity.com/ Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: tshinder@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')