If it's not available as a console snap-in you have to run the ISA setup on your workstation and only choose the administration tools. That will install the ISA admin objects which will connect to your ISA servers. If at that point you get Access Denied trying to remotely connect then run dcomcnfg on the servers. -Shawn ----- Shawn R. Quillman Robert Bosch Corporation RBNA/CIT1.1 38000 Hills Tech Drive Farmington Hills, MI 48331 (248) 553-1164 (P) (248) 848-2855 (F) shawn.quillman@xxxxxxxxxxxx -----Original Message----- From: Jeff Sloan [mailto:jsloan@xxxxxxxxxxxx] Sent: Friday, December 06, 2002 3:07 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: adding ISA MMC http://www.ISAserver.org The correct command is dcomcnfg. If you get this to work, please email me the instructions for doing the whole thing. I dont have it as a console plugin i can add. WinXP pro sp1 and all that jaz. ------------------------------------------------------ List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ ------------------------------------------------------ Exchange Server Resource Site: http://www.msexchange.org/ Windows Security Resource Site: http://www.windowsecurity.com/ Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: shawn.quillman@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')