RE: Yahoo webcam
- From: "Ian Roberts" <IanRoberts@xxxxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Fri, 22 Nov 2002 15:18:55 -0000
Dear all,
Many thanks for all your help. I've now managed to
get my Yahoo webcam working. I needed to set a
protocol definition not a packet filter for port 5100.
Ian
-----Original Message-----
From: Quillman Shawn (RBNA/CIT1.1)
[mailto:Shawn.Quillman@xxxxxxxxxxxx]
Sent: 22 November 2002 14:29
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: Yahoo webcam
You need a protocol rule for outgoing traffic, packet filter for
incoming traffic.
-Shawn
-----
Shawn R. Quillman
Robert Bosch Corporation RBNA/CIT7
38000 Hills Tech Drive
Farmington Hills, MI 48331
(248) 553-1164 (P) (248) 848-2855 (F)
shawn.quillman@xxxxxxxxxxxx
-----Original Message-----
From: Ian Roberts [mailto:IanRoberts@xxxxxxxxxxxxxx]
Sent: Friday, November 22, 2002 9:20 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: Yahoo webcam
http://www.ISAserver.org
Mark,
Thanks for getting back to me. I'm very new to ISA
server.
I've tried opening the packet filter for port 5100 i've
even
trrown the firewall wide open.
Do I also need to create a protocol definition ? and if
so
how do I do this and do I need to make any changes
on the yahoo software.
Many thanks for your help
Ian
-----Original Message-----
From: Kingery, Mark
[mailto:Mark.Kingery@xxxxxxxxxxxxxx]
Sent: 22 November 2002 14:09
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: Yahoo webcam
http://www.ISAserver.org
For Yahoo camera you need to allow port 5100.
-----Original Message-----
From: Ian Roberts [mailto:ian@xxxxxxxxxxxxxx]
Sent: Friday, November 22, 2002 5:34 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] Yahoo webcam
http://www.ISAserver.org
I've been trying to get my Yahoo messenger
webcam to work with ISA. So far
with no success I've even tried throwing the
firewall wide open and
allowing any port still without any sucess. Can
anyone please tell me how
this is done or if not that it definately can't
be done.
Also if not would it work if the cam and
software was installed on the ISA
server itself ?
Many thanks.
------------------------------------------------------
List Archives:
http://www.webelists.com/cgi/lyris.pl?enter=isalist
ISA Server Newsletter:
http://www.isaserver.org/pages/newsletter.asp
ISA Server FAQ:
http://www.isaserver.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Exchange Server Resource Site:
http://www.msexchange.org/
Windows Security Resource Site:
http://www.windowsecurity.com/
Windows 2000/NT Fax Solutions:
http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this
ISAserver.org Discussion List as: mark.kingery@xxxxxxxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')
------------------------------------------------------
List Archives:
http://www.webelists.com/cgi/lyris.pl?enter=isalist
ISA Server Newsletter:
http://www.isaserver.org/pages/newsletter.asp
ISA Server FAQ:
http://www.isaserver.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Exchange Server Resource Site:
http://www.msexchange.org/
Windows Security Resource Site:
http://www.windowsecurity.com/
Windows 2000/NT Fax Solutions:
http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this
ISAserver.org Discussion List as: ian@xxxxxxxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')
------------------------------------------------------
List Archives:
http://www.webelists.com/cgi/lyris.pl?enter=isalist
ISA Server Newsletter:
http://www.isaserver.org/pages/newsletter.asp
ISA Server FAQ:
http://www.isaserver.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Exchange Server Resource Site:
http://www.msexchange.org/
Windows Security Resource Site:
http://www.windowsecurity.com/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this ISAserver.org
Discussion List as: shawn.quillman@xxxxxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')
Other related posts:
